trc.conf tweaks. - uwu - hardware bitcoin wallet software and build system
  HTML git clone https://git.parazyd.org/uwu
   DIR Log
   DIR Files
   DIR Refs
   DIR README
   DIR LICENSE
       ---
   DIR commit 41d39b6a70db38aadbf3fe00a113f078547f1d25
   DIR parent 63b52c3765411fb6bbe2f919f8ccd4cff6f1b9fa
  HTML Author: parazyd <parazyd@dyne.org>
       Date:   Sat, 21 Nov 2020 21:09:49 +0100
       
       rc.conf tweaks.
       
       Diffstat:
         M README.md                           |      13 +++++++------
         M install.sh.in                       |      21 +++++++++++++++------
       
       2 files changed, 22 insertions(+), 12 deletions(-)
       ---
   DIR diff --git a/README.md b/README.md
       t@@ -130,12 +130,13 @@ you to input a sudo password. Try inputting it and pressing `Enter` to
        continue.  Otherwise, you may want to set up a `NOPASSWD` entry in
        sudoers, or something similar to prolong the timeout.
        
       -This will probably take a little bit. When this is issued, the build
       -system will start downloading the necessary source code and binaries. It
       -will be compiling the Linux kernel, and setting up and configuring an
       -Alpine Linux chroot. Once done, the chroot will be packed and compressed
       -into a cpio archive which can then be extracted on a microSD card we can
       -use with our Raspberry Pi Zero.
       +This process can take 20 minutes of crunching, depending on your
       +hardware. When this is issued, the build system will start downloading
       +the necessary source code and binaries. It will be compiling the Linux
       +kernel, and setting up and configuring an Alpine Linux chroot. Once
       +done, the chroot will be packed and compressed into a cpio archive which
       +can then be extracted on a microSD card we can use with our Raspberry Pi
       +Zero.
        
        
        Hardware
   DIR diff --git a/install.sh.in b/install.sh.in
       t@@ -4,6 +4,9 @@
        # See LICENSE file for copyright and license details.
        set -e
        
       +# Clean up some static files from the chroot tarball
       +rm -f /etc/shadow /etc/alpine-release /etc/issue /etc/os-release
       +
        cat <<EOF > /etc/apk/repositories
        https://nl.alpinelinux.org/alpine/edge/main
        https://nl.alpinelinux.org/alpine/edge/community
       t@@ -25,10 +28,18 @@ adduser -D -s /bin/ash uwu
        echo "@USERCREDENTIALS@" | chpasswd
        echo "@ROOTCREDENTIALS@" | chpasswd
        
       -sed -e 's/#rc_parallel="NO"/rc_parallel="YES"/' -i /etc/rc.conf
       +sed -e 's/^#rc_parallel=.*/rc_parallel="YES"/' \
       +        -e 's/^#unicode=.*/unicode="NO"/' \
       +        -e 's/^rc_tty_number=.*/rc_tty_number=1/' \
       +        -i /etc/rc.conf
        
       -cat <<EOF >> /etc/inittab
       +cat <<EOF > /etc/inittab
       +# /etc/inittab
       +::sysinit:/sbin/openrc sysinit
       +::sysinit:/sbin/openrc boot
       +::wait:/sbin/openrc default
        ttyGS0::respawn:/sbin/getty -L ttyGS0 115200 vt100
       +::shutdown:/sbin/openrc shutdown
        EOF
        
        echo "ttyGS0" >> /etc/securetty
       t@@ -38,7 +49,5 @@ for i in $boot_initscripts; do
                rc-update add $i boot
        done
        
       -#default_initscripts="electrum-daemon"
       -#for i in $default_initscripts; do
       -#        rc-update add $i default
       -#done
       +# Final cleanup
       +rm -f /etc/shadow- /etc/group- /etc/passwd-