

                       MICROSOFT(R) WORKS VERSION 3.0
                           HP LASERJET 4L PRINTER
                         PRINTER DRIVER INSTALLATION



     ABOUT THIS DOCUMENT

     This document will help you install and select the HP LaserJet 4L
     printer driver for Microsoft Works version 3.0.


     INSTALLING A PRINTER DRIVER

     Setting up your HP LaserJet 4L printer with Microsoft Works version
     3.0 is a two-step process:

     1.   Installing the printer driver.

     2.   Selecting the printer driver in Microsoft Works version 3.0.

          To install a printer driver for Microsoft Works version 3.0
          from the Printer Driver disk that came with your HP LaserJet
          4L printer, follow these steps:
     ___________

     Note   If you are currently viewing this application note, you may
            have completed some of the steps listed below.
     ___________

     1.   Insert the disk in drive A: (or B:).

     2.   At the operating system prompt, type A: (or B:), then press
          [Enter] to make A: (or B:) the current drive.

     3.   At the prompt, type DRIVER4L, then press [Enter].

          a.   At the PROGRAM INFORMATION menu, press any key to
               continue.

          b.   At the main menu, select Works Version 3.0, then press
               [Enter].

     ___________

     Note   One of the options offered is "View Application Note."  If
            you are now viewing the Microsoft Works version 3.0
            Application Note, read this section and the next section
            entitled "Selecting a Printer Driver".  When you have
            finished reading both sections, press the [Escape] key to
            exit the Application Note and proceed to step "c," below.
     ___________

          c.   Select "Copy Driver File(s)," then press [Enter].

          d.   If the path shown for Microsoft Works version 3.0 is
               correct, press [Enter].  However, if the default path
               that is shown is not correct, use the "Backspace" key to
               erase it; type the correct path; then press [Enter].

               When the update is complete, the following message is
               displayed:

               "The driver file has been copied to your hard disk."


     SELECTING A PRINTER DRIVER

     You must now run Microsoft Works version 3.0 to select the printer 
     driver.  To add the HP LaserJet 4 printer to the list you must 
     follow the directions in Microsoft Works manual.


     NOTICE

     The information in this document is subject to change without
     notice.

     HEWLETT-PACKARD MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS
     MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
     MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  Hewlett-
     Packard shall not be liable for errors contained herein or for
     incidental consequential damages in connection with the furnishing,
     performance, or use of this material.

     Copyright (C) 1992 by HEWLETT-PACKARD COMPANY.

     Microsoft(R) is a registered trademark of Microsoft Corporation
