DIR Return Create A Forum - Home
---------------------------------------------------------
The Wedge Watering Hole
HTML https://zigaspace.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: Wedge chat
*****************************************************
#Post#: 180--------------------------------------------------
Re: 4.6 Stage 3
By: carob Date: October 1, 2012, 11:13 am
---------------------------------------------------------
Cant see it on there site mate. Cant see much being honest apart
from this web page is still under construction stuff.
Rob
#Post#: 181--------------------------------------------------
Re: 4.6 Stage 3
By: martinSX Date: October 1, 2012, 12:40 pm
---------------------------------------------------------
If you go to their main web page on the left hand side you can
see differant areas, go to products then scroll down to
injection and clkick on it try here mate
HTML http://www.v8developments.co.uk/
#Post#: 182--------------------------------------------------
Re: 4.6 Stage 3
By: carob Date: October 1, 2012, 1:34 pm
---------------------------------------------------------
Thats the page i go to. But there is no menu on the left some
how ???
Rob
#Post#: 183--------------------------------------------------
Re: 4.6 Stage 3
By: martinSX Date: October 1, 2012, 2:09 pm
---------------------------------------------------------
does this one work fella
HTML http://www.v8developments.co.uk/prod_inject.html
#Post#: 184--------------------------------------------------
Re: 4.6 Stage 3
By: wooly3motors Date: October 1, 2012, 2:26 pm
---------------------------------------------------------
V8 developements built my 5ltr for me,stage 3 big valve heads
ported and polished,double valve springs,shortened trumpets, MC1
fast road cam,New barings,balanced pistons and rods etc,etc,etc.
Did a good job and it goes like it wants to kill me,what more
can I say.
Do you know if they have a facility now to dino the engines in
the car other than.on their test bed? Ta ta.
Wooly.
#Post#: 185--------------------------------------------------
Re: 4.6 Stage 3
By: carob Date: October 1, 2012, 2:42 pm
---------------------------------------------------------
Dyno not sure...... Cheers Martin for the link, looks good that.
Rob
#Post#: 186--------------------------------------------------
Re: 4.6 Stage 3
By: martinSX Date: October 1, 2012, 3:09 pm
---------------------------------------------------------
Hi Wooly na still only on their engine dyno, no rolling road...
#Post#: 187--------------------------------------------------
Re: 4.6 Stage 3
By: wooly3motors Date: October 1, 2012, 3:51 pm
---------------------------------------------------------
Righto,will have to persevere around my neck of the woods then,
still messing with rad and oil cooler at mo but the guys at bbwf
rolling rd said to get a rising rate fuel pressure reg and
possibly some new coil packs as well, was only hitting 202 bhp
at first then finished on 240 odd but still had loads to go. V8
clocked it at 302 straight after build but I need the other bits
to put it right on rolling road,what's money?
#Post#: 188--------------------------------------------------
Re: 4.6 Stage 3
By: carob Date: October 2, 2012, 12:19 pm
---------------------------------------------------------
Well been down to V8D today. Going down the MS2 route also.
Polished and ported inlet manifold also. Good to see and here
Martin's SX. Great beast that car Martin.
Rob
#Post#: 189--------------------------------------------------
Re: 4.6 Stage 3
By: martinSX Date: October 2, 2012, 2:42 pm
---------------------------------------------------------
Hi Rob tell me more bud hows the old girl ? Their a good bunch
are'nt they, are you going for a stealth cam or something eals?
*****************************************************
DIR Next Page