DIR Return Create A Forum - Home
       ---------------------------------------------------------
       World Of Etching
  HTML https://worldofetching.createaforum.com
       ---------------------------------------------------------
       *****************************************************
   DIR Return to: Stencil Types
       *****************************************************
       #Post#: 48--------------------------------------------------
       Stencil material
   DIR By: petroman2014
       Date: August 9, 2014, 9:02 pm
       ---------------------------------------------------------
       Since I have been doing nothing but cutting Vinyl I am use to
       using Oracal as material vinyl but ordered some( a 50ft roll) of
       American SandBlast mask, have not cut anything yet as been busy
       building frame to get HOMEMADE BLAST CABINET 24" off ground
       first then will continue on base of cabinet itself....So soon as
       I get orperational I will post images of equipment....have a
       good one..
       #Post#: 54--------------------------------------------------
       Re: Stencil material
   DIR By: Rlvied
       Date: August 10, 2014, 6:49 am
       ---------------------------------------------------------
       Petro make sure that you calk all of the seams when you build
       the box. The media sure has a way of finding all of the cracks.
       I have not heard of the American sand blast mask you are talking
       about. What is the mil thickness of it? I mainly use Avery paint
       mask
       *****************************************************
       Page 1 of 1