DIR Return Create A Forum - Home
---------------------------------------------------------
WCEAA
HTML https://wceaa.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: Policies
*****************************************************
#Post#: 34--------------------------------------------------
Run and CAD Sheet Disposition
By: Director Date: November 14, 2011, 5:21 pm
---------------------------------------------------------
Purpose: Insure that all runs are entered into MCA.
Runs should only be found in the following locations:
[list type=decimal]
[li]Completed runs will go in the drop box.[/li]
[li]Runs being entered into MCA will remain with the person
entering the run.[/li]
[li]Runs not entered will be filed in the file cabinet that
contains the time sheets and is labelled Runs Not Entered. If
you cannot enter a run after returning to the station contact
the Director. Reasonable delays will be allowed.[/li]
[/list]
CAD sheets will be attached to the run paperwork and scanned.
They do not have to be copied because Ray receives an electronic
copy for audit purposes. Use the CAD sheets for Incident
Numbers, PSAP times and dispatch times entered into MCA. The
format of the Incident Number will be YY-NNNN where YY is the
year and NNNN is the number. They will look like: 11-7262. Check
all run sheet times to the CAD sheet. Stations other than
Station 20 cannot follow this portion of the procedure until
their FAX machines are enabled. We are looking into what is
required to get all runs FAXed to all stations.
Do not forget to post that you read the procedure and will
follow it. Other posted comments are encouraged.
#Post#: 59--------------------------------------------------
Re: Run and CAD Sheet Disposition
By: bday Date: November 26, 2011, 1:38 pm
---------------------------------------------------------
more changes....okay, i have read and agree to follow it, if i
can remember all of this.....
#Post#: 61--------------------------------------------------
Re: Run and CAD Sheet Disposition
By: dglover Date: November 27, 2011, 9:21 am
---------------------------------------------------------
Ray:
I have read this and understand. Joe Villers also read this
too.
I am not getting any emails from you at all. I had to find out
second handed that this was being done.
Deena
#Post#: 62--------------------------------------------------
Re: Run and CAD Sheet Disposition
By: Jim Colvin Date: November 27, 2011, 2:08 pm
---------------------------------------------------------
I understand and agree with this new procedure. I also agree to
follow this procedure whenever station 30 has a workable fax
machine so as to receive the CAD reports.
#Post#: 87--------------------------------------------------
Re: Run and CAD Sheet Disposition
By: dcarubia Date: December 1, 2011, 4:35 pm
---------------------------------------------------------
I understand and comply .
#Post#: 92--------------------------------------------------
Re: Run and CAD Sheet Disposition
By: lsailor Date: December 3, 2011, 8:56 am
---------------------------------------------------------
i understand and will comply
#Post#: 112--------------------------------------------------
Re: Run and CAD Sheet Disposition
By: shuggins Date: December 5, 2011, 2:31 pm
---------------------------------------------------------
Read
#Post#: 143--------------------------------------------------
Re: Run and CAD Sheet Disposition
By: kkimple Date: December 12, 2011, 8:34 am
---------------------------------------------------------
I understand and will comply
*****************************************************