DIR Return Create A Forum - Home
---------------------------------------------------------
Virtual Racing Championship
HTML https://vrc.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: General Discussion
*****************************************************
#Post#: 3828--------------------------------------------------
Re: OSW Kit
DIR By: Simon J
Date: August 1, 2017, 1:47 am
---------------------------------------------------------
--- Quote from: Guiga link ---
>
> I remember looking into OMP gloves and wanting the classic
styled ones. In the end I wore another pair of gloves I had,
just very light sporty material, to prevent the moisture
exchange with my wheel (albeit I only began doing that too
late).
>
--- End Quote ---
did not know that thanks ;D
We have light rigging glove at work so prob pilfer set of them
this week see finger less ones there.
will look for nice pair online too
#Post#: 3882--------------------------------------------------
Re: OSW Kit
DIR By: Simon J
Date: August 3, 2017, 2:25 am
---------------------------------------------------------
;D
easy to setup downloaded there rF2 controller .json took 2mins
too setup servo motor settings
put .json file in controllers folder booted rf2 re my HE pedals.
set ffb to 20% out of game and .20 multi in game ready to start
;D
well now to get cheep wheel till Monday when mine comes :)
HTML http://www.mediafire.com/convkey/3c4a/rwngaynaxpud93b6g.jpg
#Post#: 3888--------------------------------------------------
Re: OSW Kit
DIR By: Gerry Sweetland
Date: August 3, 2017, 7:12 am
---------------------------------------------------------
--- Quote from: Simon J link ---
>
> ;D
>
> easy to setup downloaded there rF2 controller .json took
2mins too setup servo motor settings
> put .json file in controllers folder booted rf2 re my HE
pedals. set ffb to 20% out of game and .20 multi in game ready
to start ;D
> well now to get cheep wheel till Monday when mine comes :)
>
>
--- End Quote ---
So, is the wife's car gonna be missing a steering wheel? ;D
Gerry
#Post#: 3890--------------------------------------------------
Re: OSW Kit
DIR By: Guiga
Date: August 3, 2017, 11:49 am
---------------------------------------------------------
Your ingame multi shouldn't be that low! It should be around 1.0
for most adequately calibrated content, with some like the
Radical turned down to .75-.80. Run rF2 in DX9, use the FFB
Clipping plug in, and then set the multiplier, which will likely
be near the range I mentioned. Then go to your wheel's profile
and lower the strength there if you need to.
#Post#: 3891--------------------------------------------------
Re: OSW Kit
DIR By: Simon J
Date: August 3, 2017, 2:19 pm
---------------------------------------------------------
--- Quote from: Gerry Sweetland link ---
>
> [quote author=Simon J link=topic=287.msg3882#msg3882
date=1501745121]
> ;D
>
> easy to setup downloaded there rF2 controller .json took
2mins too setup servo motor settings
> put .json file in controllers folder booted rf2 re my HE
pedals. set ffb to 20% out of game and .20 multi in game ready
to start ;D
> well now to get cheep wheel till Monday when mine comes :)
>
>
--- End Quote ---
So, is the wife's car gonna be missing a steering wheel? ;D
Gerry
[/quote]
Lol i'm happily single no wife or ex wife's ;D cant imagine
one letting me blow that much dosh on wheel and pedals. :)
but if i was and it fitted yep she would had set of mole grips
for few days. probably why i'm single ;D
on that front went to 2 car shops locally few 2nd hand car
places no wheels, seems since air bags they don't sell so much.
So got to work looked local to me nothing so online i went
Amazon came up Amaziltch.
so went to where i brought last wheel for skyline defeated to
getting it same day lol:)
HTML http://www.demon-tweeks.co.uk/motorsport/steering-wheels/omp-racing-gp-steering-wheel
being delivered tomorrow ;D 8)
so Auto gears till Monday :) have a quick release hub due too
from were servo kit came from and one with wheel so will see
which QR boss i like best and get another same so easy swap for
both wheels :)
#Post#: 3892--------------------------------------------------
Re: OSW Kit
DIR By: Simon J
Date: August 3, 2017, 2:55 pm
---------------------------------------------------------
--- Quote from: Guiga link ---
>
> Your ingame multi shouldn't be that low! It should be around
1.0 for most adequately calibrated content, with some like the
Radical turned down to .75-.80. Run rF2 in DX9, use the FFB
Clipping plug in, and then set the multiplier, which will likely
be near the range I mentioned. Then go to your wheel's profile
and lower the strength there if you need to.
>
--- End Quote ---
part of initial setup as not got wheel yet
its set like that for first go 20 out and .20 in game big
letters this is important ;D
then if all good in game will turn multi up prob to check all
it good and no pinky's broken
usually run .75 to 1.0 depending on car
24hrs will find out :)
#Post#: 3902--------------------------------------------------
Re: OSW Kit
DIR By: Simon J
Date: August 5, 2017, 6:18 pm
---------------------------------------------------------
HTML https://forum.studio-397.com/index.php?threads/share-your-osw-settings.52499/page-7#post-908702
All setup with temp wheel have set motor at 50% max force 10nm
ish and in game multi at .45 any more and 5 laps is enough lol
Spent all day playing trying various controller settings not
that it felt bad straight off clip meter in DX11 would have save
allot of time though :)
I like to fiddle but took allot less time than T500 and rf2 and
few weeks less than rF1 real feel.
Other people done the hard work over last few years so I just a
copy paste controller text and change few things in each one use
best bits for feel i like :)
Using most of ApainPlost settings felt good straight away ;D
may help others here covers most Servo based type setups
#Post#: 3904--------------------------------------------------
Re: OSW Kit
DIR By: Simon J
Date: August 5, 2017, 6:20 pm
---------------------------------------------------------
Got to a final setting for now feels amazing. trick was turning
everything down in FFB force and multi in game.
was trying it at max FFB 100% and .75 muti way too much
max FFB at 45 to 55 think that is 10nm ish and using .45 multi
so 5nm ish max on the T500 that was was 2.4nm
See what people were saying how good these are this feels
amazing now :)
Wheel comes today hopefull give me 2 weeks before season starts
to get to gips with wheel and C7R ;D ;D ;D
#Post#: 3915--------------------------------------------------
Re: OSW Kit
DIR By: Simon J
Date: August 8, 2017, 10:18 am
---------------------------------------------------------
;D
HTML http://www.mediafire.com/convkey/0c67/npj120l0128bf7u6g.jpg
#Post#: 3916--------------------------------------------------
Re: OSW Kit
DIR By: Chad Brown
Date: August 8, 2017, 1:40 pm
---------------------------------------------------------
That looks super sexy. Hope it feels as good as it looks.
*****************************************************
Page 2 of 4
DIR Previous Page
DIR Next Page