DIR Return Create A Forum - Home
       ---------------------------------------------------------
       Venatus Australia
  HTML https://venatusaustralia.createaforum.com
       ---------------------------------------------------------
       *****************************************************
   DIR Return to: Server General Discussion
       *****************************************************
       #Post#: 673--------------------------------------------------
       Pro Tip #Whatever: Did you know the Armour Repair Station uses a
        lot of power?
       By: datristan Date: May 21, 2017, 9:35 pm
       ---------------------------------------------------------
       Ok i know most of you guys are no on 6 yet, but here's a pro tip
       to start with...
       The Armour Repair Station uses 150kw (roughly 180 small fuel
       cells per 24 hours real time).
  HTML http://i64.tinypic.com/2czf4ee.jpg
       So what can we do about this?
       Well thanks to the new signals & sensors block we can make the
       Armour Repair Station Turn off automatically for 1kw.
       Step 1: Place your Armour Repair Station
       Step 2: Place a sensor (either the area one or the light beam)
  HTML http://i64.tinypic.com/wval47.jpg
  HTML http://i65.tinypic.com/2rwxkky.jpg
       In this example i have placed it on the top face of the Armour
       Repair Station.
  HTML http://i68.tinypic.com/28lfm9f.jpg
       Step 3: Press p and configure the sensor in the control panel.
  HTML http://i65.tinypic.com/n3aqyv.jpg
       Step 4: Now in the Control Panel, go to the Signal Logic Page
       and set the TxSignal for the sensor. You can use any name, just
       remember it for the next step.
  HTML http://i68.tinypic.com/vht7gl.jpg
       Step 5: Still in the signal Logic page, find the Armour Repair
       Station and set the on/off trigger to the TxSignal in step 4;
       with the command 'follow'.
  HTML http://i68.tinypic.com/143419t.jpg
       You may have to leave the area of the sensor and re-enter it for
       it to take effect.
       Have fun Guys!
       #Post#: 678--------------------------------------------------
       Re: Pro Tip #Whatever: Did you know the Armour Repair Station us
       es a lot of power?
       By: Murder Boner Date: May 23, 2017, 6:43 pm
       ---------------------------------------------------------
       This is a good trick, used it thanks to Trist for this pro tip.
       I also used it to put a sensor in my toilet, so now I no longer
       have to touch that FILTHY LIGHT SWITCH - you know its 50/50
       chance it's gonna have pee on it.
       #Post#: 858--------------------------------------------------
       Re: Pro Tip #Whatever: Did you know the Armour Repair Station us
       es a lot of power?
       By: iYRe Date: October 3, 2017, 8:19 pm
       ---------------------------------------------------------
       I know this is a bit late, but you can actually just turn it
       off. It still repairs stuff when you put things in, so I wouldnt
       bother with any sensors or anything.. just have it not use any
       power at all :)
       *****************************************************