DIR Return Create A Forum - Home
       ---------------------------------------------------------
       Varminthunters
  HTML https://varminthunters.createaforum.com
       ---------------------------------------------------------
       *****************************************************
   DIR Return to: Ammo/Reloading
       *****************************************************
       #Post#: 2346--------------------------------------------------
       Quick Load Do you use it?
       By: weird1 Date: October 24, 2013, 9:07 pm
       ---------------------------------------------------------
       I bought Quick Load last winter about the same time I bought RSI
       shooting lab, and pressure trace. I was wondering if any of
       ya'll have used any of this software / hardware before? I have
       not had the time to do more than play with any of it so far. It
       does require some tinkering to get any of it in sync with your
       gun(s) but so far it seems to be another tool in the quiver so
       to speak. It sure is fun to stretch, and cut barrels with out
       sticking them in the lathe, or ordering a new one and fitting
       it. As I said before I have not had the time to spend getting
       everything in sync, so I have done little more than play with
       it. I have tested a few loads at the supplied settings, and they
       have been close enough to the actual speeds over the
       chronograph. It has prompted me to dig out an old interarms mark
       X and a 1-12 6mm barrel I had on a 700 action and building a
       short barreled general purpose gun for the ranch. I am thinking
       20 to 22 inch barrel length, and a 6mm rem chamber as I have
       everything on hand to put that together. The length could go out
       to 26, but I want a shorter one for the pick-up and side by side
       for those random shot opportunities that pop up while doing
       maintenance and filling feeders.
       #Post#: 2378--------------------------------------------------
       Re: Quick Load Do you use it?
       By: Yote59 Date: November 11, 2013, 12:22 pm
       ---------------------------------------------------------
       [quote author=weird1 link=topic=434.msg2346#msg2346
       date=1382666859]
       I bought Quick Load last winter about the same time I bought RSI
       shooting lab, and pressure trace. I was wondering if any of
       ya'll have used any of this software / hardware before? I have
       not had the time to do more than play with any of it so far. It
       does require some tinkering to get any of it in sync with your
       gun(s) but so far it seems to be another tool in the quiver so
       to speak. It sure is fun to stretch, and cut barrels with out
       sticking them in the lathe, or ordering a new one and fitting
       it. As I said before I have not had the time to spend getting
       everything in sync, so I have done little more than play with
       it. I have tested a few loads at the supplied settings, and they
       have been close enough to the actual speeds over the
       chronograph. It has prompted me to dig out an old interarms mark
       X and a 1-12 6mm barrel I had on a 700 action and building a
       short barreled general purpose gun for the ranch. I am thinking
       20 to 22 inch barrel length, and a 6mm rem chamber as I have
       everything on hand to put that together. The length could go out
       to 26, but I want a shorter one for the pick-up and side by side
       for those random shot opportunities that pop up while doing
       maintenance and filling feeders.
       [/quote]
       I reload all my ammo....gonna have to check out this software
       indeed.  Thanks for sharing.
       *****************************************************