DIR Return Create A Forum - Home
       ---------------------------------------------------------
       Box Support
  HTML https://tvboxsupport.createaforum.com
       ---------------------------------------------------------
       *****************************************************
   DIR Return to: Troubleshooting and Guides
       *****************************************************
       #Post#: 27--------------------------------------------------
       Running a Manual Update
       By: boxsupport Date: September 24, 2018, 4:34 pm
       ---------------------------------------------------------
       RUNNING THE UPDATE: CURRENTLY AT V2.0 BUILD N6 Only! (SAYS IN
       UPPER AREA BY CLOCK INSIDE MEDIA PLAYER)
       If you want a video of me explaining and actually performing
       this, along with personal one on one support and videos for all
       kinds of things, you will need an upgraded personal support
       plan. ----> <a
       href="
  HTML https://tvboxsupport.createaforum.com/general-announcements-and-updates/personal-support-plan/">link</a>
       ***Read the extra info on the post below in addition to
       performing the steps for your initial boot after install***
       The media player runs automatic updates when you exit out of the
       media player and go back in (red media button 2x) and if there's
       an update, A message will pop-up and say to press OK to close
       and finish the changes. Do it. This is the main way you should
       be updating only.
       If you haven't updated in a while and if it is glitched and
       constantly repeats the notification for a update then you will
       have to do the full manual update process below. So if you want
       to wipe the media player and start fresh, especially if it's
       been a while or you want to bet sure old outdated files are
       cleared away and ensure you are up to date, do the following
       steps.
       Steps for N6 only:
       1. Go to the home screen and clear data/media lab in the tools
       folder. Back out to home screen when done.
       2. Click on the Media Lab in center
       6. Let it load for a good while for it's first initialization,
       can take up to 10 minutes sometimes.
       Older Units such as the N1, n2, N4K, and N4Kx are no longer
       supported at this time
       #Post#: 28--------------------------------------------------
       Re: Running a Manual Update
       By: boxsupport Date: September 24, 2018, 4:40 pm
       ---------------------------------------------------------
       Things you May see upon first boot of the media player after a
       fresh install of the build
       Activating a "Trakt" account.
       You may see a dialog box asking if you want to sync a Trakt
       account to your box. If you have Trakt then you can jot down
       that code to sync it to your account. If you do not have Trakt,
       and do not care about it, then click Dismiss and don't worry
       about it. If you don't know what Trakt is, then you probably
       wont care about it anyways so just click dismiss. If you want
       trakt or want to know what it is, google what it is.
       Missing Addons that need to be downloaded
       The build will provide you with all the add-ons you need. There
       are some that merely have the icon but when you click on it, it
       will say it's not in the system and would you like to download
       the add-on. Click install. This is so that the build isn't
       bloated and people can choose what they want installed as they
       want them instead of forcing everyone to have them when everyone
       might not use it. If you click on one to install it and it says
       installation failed, then the repos that host that file are
       offline on the internet, use another add-on
       *****************************************************