DIR Return Create A Forum - Home
---------------------------------------------------------
Trophy Retailers Forum
HTML https://trophyretailersforum.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: General Retail Discussion Board
*****************************************************
#Post#: 179--------------------------------------------------
Looking for a new engraving machine
DIR By: James
Date: March 1, 2018, 5:48 pm
---------------------------------------------------------
Hi,
Looking to upgrade our engraving machines. Needs to be good for
engraving plinth bands, plates and glass awards.
Have looked at Gravograph M40G, Newinghall 350 and U-Marq
Universal.
Any one got experience of these machines and can point me in the
right direction?
Cheers
#Post#: 180--------------------------------------------------
Re: Looking for a new engraving machine
DIR By: Adam
Date: March 6, 2018, 4:11 am
---------------------------------------------------------
Hi James
I've used many different machines over the years and by far the
best in my experience are the Newing Hall machines, they aren't
cheap to buy but they work well and last a long long time. I
think Swatkins are the UK distributors if you are looking for a
new machine, for 2nd hand I would recommend Pantograph Services.
Adam
#Post#: 181--------------------------------------------------
Re: Looking for a new engraving machine
DIR By: James
Date: March 7, 2018, 2:12 am
---------------------------------------------------------
Thanks Adam, after some research i had decided Newing Hall was
the way to go. Thanks for letting me know distributors, will
contact them both and see where we get.
Cheers
James
#Post#: 184--------------------------------------------------
Re: Looking for a new engraving machine
DIR By: Adam
Date: March 23, 2018, 7:25 am
---------------------------------------------------------
Hi James
If you do get a Newinghall machine you will find the JLS
software that is included is good for basic text engraving but
you can't design logo's etc with it, so you will probably need a
copy of something like Engravelab as well.
#Post#: 185--------------------------------------------------
Re: Looking for a new engraving machine
DIR By: James
Date: March 23, 2018, 6:12 pm
---------------------------------------------------------
Yes, i have the JLS software and corel to do logo's etc.....
Been an invaluable piece of machinery since it arrived,
*****************************************************
Page 1 of 1