DIR Return Create A Forum - Home
---------------------------------------------------------
tripple et clan
HTML https://trippleclan.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: General Discussion
*****************************************************
#Post#: 453--------------------------------------------------
ET Console Commands - Beginner
By: Tuxtlse Date: May 3, 2014, 5:33 pm
---------------------------------------------------------
First off, does everyone here know what the console is? If not
read the next paragraph, if you do you can skip this useless
paragraph. The console is where a player see's all the
information that is going on at the server there on. Well, lets
break it done further, one can use the console outsite of the a
server or edit an cfg, however most of the commands listed below
will be for inside the server. To see the console, a player can
click the ~ button which is to the left to the one or above the
tab, however this is the default set on the standard config (
Refer to Sub Note 1 ), which comes with downloading the game. If
you made your own or downloaded one off the internet, the
console key might be different. The console, while inside a
server, will show all of the deaths and kills of everyone on the
server, the public chat, the team chat, fireteam chat, console
messages, and killing/death sprees. The commands listed below
will show more information as you type them.
- Sub Note 1: A config is setting your own settings that is not
the default of the one provided. To locate the default simply
look for Default.cfg or it might be Etplayer.cfg which will be
in the EtMain folder located on the computer. Its best not to
change these as one might have to start over.
- Console Commands:
/reconnect => Seem to be lagging? Do this command in the console
to reconnect to the current server you are on.
/kill => Use this command to kill your self out on the
battlefield, but make sure to do it before you die and wait
three seconds so
you don't get
scared to death.
/quit => Use this command to exit the game quickly.
/serverinfo => Use this command to check out some of the
information about the server you are currentle connected to.
Somethings it will tell you will be the Server Name and The Map
you are currently on.
/cg_fov => This command is used for changing your field of
vision, the higher it is, the more you can see, but make sure
the server
your own has
a limit on how high it can be.
/cl_maxpackets => Change this to increase your output of your
internet, and remember, the highest isn't always the best, so
test
it out some.
/connect => Use this to connect to a server with the IP address.
For
example: /connect 213.108.30.103:26030
/weaponstats => Use this command to check the stats of yourself
or another player, to know what the number stands for, please
use/see /players.
For example: /weaponstats 4 ( For a player that isn't you ).
/weaponstats ( For you ).
/team => This command takes a lot less time then going intro
limbo Menu to select your team.
- To join
allies, do /team b
- To join axis,
do /team r
- To join
spectators, do /team s
/m => This command is used to private message someone on the
server you are currently on.
For example /m <
player name or # > To know how to get the number, please see the
/players command.
/bind => This command is used to stick a command to a key on the
keyboad. Anything from a saying to a vsay to a playing option.
For example:
/bind o vsay hi ^qH^weeeey^q!
/bindlist => This commans is to see all the commands you have
binded to keys on your keyboad.
/clear => Using this command will make everything on the console
disappear, erased. It cannot be undone, so make sure you don't
want to take
any snapshoots of anything.
/demo => Using this will start a video recording of the players
gamescreen. You can also name this file by doing /demo
frostbite1.
/autoscreenshot => This will take just a single snapshot of the
screen that it sees as you enter the command. It can take
picture
of the game playarea as well as the console.
/exec => This command is used generally to start a config. If
you want to use this it would look like /exec "Name of config"
( /exec autoexec
).
/follow => This command would be used to follow a player while
in game. It can be /follow 3 or /follow Desje.
/record => This command does samething as /record, but in its
name it will show the map, date and time of recording.
/vid_restart => When one changes the resolution, well even
pretty much anything at all with graphics, this command will
restart ET
and
take you back to the server if one connected to one, however, if
one is on a pb enabled server, 9 out of 10
times
pb will kick you for " Missing Window API Function", just
restart ET completly and reconnect you'll be fine.
/playdead => Some people don't know this command or people don't
choose to use it. This will make it seem to the other team
that you
are dead, but since people tap you out, some don't use this.
"Bind j playdead".
/com_maxfps => Sometimes, people set this lower so that there
computer can handle the game. This command stands for Max
Frames Per Second. Frames Per Second means the amount of still
frames that are displayed during one second of
video. So if one have a five to six years old computer and one
didn't upgrade it at all, then you'd prbably use a
less amount of, like 43 is good. If one's computer is only two
to three years old, than 76 fps a good spot to settle
at.
A new computer can go as high as 500 fps ( Not Recommended ),
125 is a pretty good mark. This is effected
by
so many factors, here are just a few:
-
Internet connection
- Age
of computer
-
Which graphics card you are using
- ET
settings
-
Location Location Location
/stoprecord => Stops the recording. Thats even if you've started
one.
/rate => This command is to increase the amount of information
packets that are being sent from you computer to the server
where it is
located. Sometimes. Highest isn't always the best. This seems,
to some people, to be a useless command, but
it is not!, with
this it will increase your output to the server. The default is
5000. Rate is capped at 45000.
Here are some
nice guidelines to consider:
- For Modem
use about 4000
- Broadband
25000
- Wireless
28000
/name => One doesn't have to step intro the limbo menu to change
there name. One can open the console and type /name
^q***^w|^qT^wuxtlse^q<3 and then your name is there with the
colors you chose.
( ***
|Tuxtlse<3 ).
/disconnect => This takes you back to the main menu of ET.
/autorecord => Records a demo with descriptive filename.
/buttomshots => If you wanna laugh at someone, here ya go.
Displays the worst aimers.
/currenttime => Shows the time according to you computer.
/players => Not as detailed as !list or !listplayers, but will
show the slot number, name in color, and nothing else that
really
matters
unless you wanna know which player is on which team.
/ready => Sets player to ready status, used only during the
warmup. If everyone is ready, match will start sooner.
/readyteam => Sets the team status to ready.
/scores => Shows a less detailed infomation about players
performance.
/showip => Shows the IP address of whatever sever one is on.
/cl_guid => This will show your guid, which is pretty much your
identifier on the server side. Here at Tripple if you want a
lvl, one needs to submit you GUID to the server.
/cg_drawgun => This toggles whether the gun will be on the
screen or not.
pb_plist => Requests that the connected PunkBuster Server
display a list of players and their current status to the
console.
#Post#: 454--------------------------------------------------
Re: ET Console Commands - Beginner
By: Kittyn Date: May 4, 2014, 12:44 pm
---------------------------------------------------------
Nice work.
#Post#: 458--------------------------------------------------
Re: ET Console Commands - Beginner
By: Km!kz Date: May 5, 2014, 3:39 am
---------------------------------------------------------
gj tux!
#Post#: 460--------------------------------------------------
Re: ET Console Commands - Beginner
By: rifle warrior Date: May 5, 2014, 5:01 am
---------------------------------------------------------
Wel done tuxiee (y)
Rifle-warrior<3
#Post#: 461--------------------------------------------------
Re: ET Console Commands - Beginner
By: Kittyn Date: May 5, 2014, 8:45 am
---------------------------------------------------------
You could possibly also add /vote yes /vote no works the same
way as f1 and f2
#Post#: 462--------------------------------------------------
Re: ET Console Commands - Beginner
By: desje Date: May 5, 2014, 2:55 pm
---------------------------------------------------------
tuxieeee :)
nice job chief keep up the good work boss ;)
grtz desie ;)
#Post#: 489--------------------------------------------------
Re: ET Console Commands - Beginner
By: Tuxtlse Date: May 9, 2014, 4:39 pm
---------------------------------------------------------
;)
*****************************************************