DIR Return Create A Forum - Home
---------------------------------------------------------
TGIF.Network
HTML https://tgifnetwork.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: Nextion Displays
*****************************************************
#Post#: 1891--------------------------------------------------
A update on the screen is available
DIR By: ke5cdk
Date: October 13, 2019, 4:29 pm
---------------------------------------------------------
Attention TGIF Spot 2.4 inch and 3.5 inch users.
A update on the screen is available.
Mitch has fixed some cosmetic issues.
Thanks so much to Mitch, EA7KDO and JAMES, KF6S For the best
screen period!!
#Post#: 2459--------------------------------------------------
Re: A update on the screen is available
DIR By: VA3CKI
Date: March 2, 2020, 10:08 pm
---------------------------------------------------------
Where is the update?
#Post#: 2462--------------------------------------------------
Re: A update on the screen is available
DIR By: ke5cdk
Date: March 3, 2020, 4:16 am
---------------------------------------------------------
this was an old post, and Im sure there have been several
updates since
I dont use Mitch's screen, but I hear you update from the screen
its self via touch commands
HTML http://mitchhopto.com/index.html
HTML http://www.tgifspot.com/
#Post#: 2701--------------------------------------------------
Re: A update on the screen is available
DIR By: VA3CKI
Date: April 10, 2020, 4:53 pm
---------------------------------------------------------
I am finding fault with Step 2 of the updating pistar
instructions or I don't have something right....
I am running PiStar 4.1.0-RC7 on a RPI 3B and have added the 3.5
K series screen connected by USB/TTL adapter via USB port on
RPi, with Mitch's latest nextion TFT file. All seems to be good
on the screen except CPU temps.
Using the instructions from Mitch's UPDATING PI-STAR WITH
NEXTION SCREEN: STEP 1, the github loads fine and the Update
works fine, all is well except no CPU temps.
STEP 2 is executed with the ./IND.sh option 3 then select #2,
all loads fine then this is where the problems start:
The HOME screen now is always waiting for data... and is always
inactive except the only box works is the LINKS button.
So... once again, format SD card and start over, done this 3
times with 2 different SD cards..... same results.
Any help would be appreciated !
Should I go to the full new Pi-Star_RPi_V4.1.0_26-Mar-2020.zip??
#Post#: 4790--------------------------------------------------
Re: A update on the screen is available
DIR By: VE4ACD
Date: December 18, 2021, 7:12 pm
---------------------------------------------------------
I’ve updated my screen in the past. 3.5” but I can not find the
procedure to do the latest update. Thanks for your
Help in advance.
*****************************************************
Page 1 of 1