DIR Return Create A Forum - Home
---------------------------------------------------------
TGIF.Network
HTML https://tgifnetwork.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: Nextion Displays
*****************************************************
#Post#: 1855--------------------------------------------------
New Screen Setup
DIR By: jcradio
Date: September 30, 2019, 11:21 am
---------------------------------------------------------
I been trying to get the new screen to work on my Nextion 3.5.
I do the install as suggested on Facebook.
The one problem I am having are as follows:
When I try to initialize the eprom.
I follow the steps listed here
HTML http://mitch.hopto.org/SetUpWiFi.html
I don't think the eprom is getting initialized. When I go into
profiles and try to setup a new profile my entries do not
register. For example setting the RX and TX offsets
I am able to enter my settings but when I hit OK there is
nothing in those corresponding boxes. It is as if I did not
enter anything.
My display is hooked up via a USB 2 TTL adapter.
I have spent a long time trying to figure this out with no
success.
Any help or suggestions would be greatly appreciated.
73 Joe N2MRH
#Post#: 1870--------------------------------------------------
Re: New Screen Setup
DIR By: n9ami
Date: October 5, 2019, 12:20 am
---------------------------------------------------------
Im running a Pi Zero W with GPIO setup anyhow I been fighting it
also. No Temps register did the BC a bunch of times, the reboot
buttons are not working etc etc. About half the stuff works. Did
a few clean installs still same. The radio is working fine, I
get folks pics on the TGIF DMR. So I don't know and I am pretty
dam good with this stuff. I might just get another complete
setup and start fresh and go back to my old screen on this dog.
Good Luck Joe.
*****************************************************
Page 1 of 1