DIR Return Create A Forum - Home
       ---------------------------------------------------------
       TGIF.Network
  HTML https://tgifnetwork.createaforum.com
       ---------------------------------------------------------
       *****************************************************
   DIR Return to: TGIF General Questions
       *****************************************************
       #Post#: 1313--------------------------------------------------
       Switch DMR Master via Anytone Keypad?
   DIR By: gskroll
       Date: June 22, 2019, 3:34 pm
       ---------------------------------------------------------
       I have a Jumbospot/Pi-star that I use in my shack and an
       Openspot2 that I use when mobile.
       I am seeking a configuration for each that allows me to switch
       (preferably via keypad on my Anytone 878) among TGIF, DMR+ (New
       England Digital Emergency Communications Network - NEDECN),  and
       Brandmeister networks.
       
       I think this can be triggered on the 878 to the OpenSpot2 via
       use of “Profiles” but am not sure on the correct configuration
       values.
       
       I suspect there must be a similar capability to switch via 878
       keypad on Pi-star Jumbospot but, again, am not yet familiar with
       the necessary configuration values.
       Bob, N4WZV, suggested I might find help in this forum.  I have
       searched but didn't find results that addressed this specific
       need.
       I expect that I am not alone in wishing to achieve this
       capability.
       Can anyone point me to a link (or post that I might have missed)
       that describes the configuration and the sequence of steps to do
       this?
       If not, is this a topic that might be useful to others with a
       similar need identifying the necessary configuration and steps
       using the keypad to achieve this capability?
       At present I have the Jumbospot configured to switch between
       Brandmeister and TGIF but it requires using a browser to use the
       "Configuration" Pi-star menu pick to flip the DMR Master in the
       DMR Configuration section.
       On the Openspot2, I have TGIF, DMR+, and Brandmeister Profiles
       defined.  However, I am a bit confused as to whether I need to
       do a Private Call to TG4000 Unlink (via the Anytone keypad)
       before doing the Private Call to 9001 (DMR+), 9002 (BM), or 9003
       (TGIF) to switch to the appropriate Profile.
       Any and all help appreciated!
       Thanks,
       Glenn
       W1GSK
       
       *****************************************************
       Page 1 of 1