DIR Return Create A Forum - Home
---------------------------------------------------------
TGIF.Network
HTML https://tgifnetwork.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: TGIF General Questions
*****************************************************
#Post#: 131--------------------------------------------------
Shark openspot 2 dmr to nxdn set up
DIR By: ericpilot
Date: December 22, 2018, 9:39 pm
---------------------------------------------------------
I have a question about how to use the shark openspot 2 cross
mode from dmr to nxdn. I am not understanding the settings of:
Default cross mode destination ID, Always use this ID in cross
mode and Allow only IDs as cross-mode callsigns. I am not sure
which one to set and do they have to be the same on the
connectors page and the settings page? I am not understanding
how to set these on the two pages, connectors and settings
pages. Also, do they need to be the same on both? Also the port
number goes with the server? The Default cross mode destination
ID on the NXDN settings page is defaulted to 31672? Is this
correct or should another box be checked?
I see this warning message on the connectors page but I don't
understand what it means:
Warning: the "Always use default cross mode destination ID"
setting is enabled, and the "Default cross mode destination ID"
is different than the server's talkgroup ID of 31010. You can
disable/change these settings on the Settings page, NXDN
settings section, or click here. Should I change it to 31010 in
this case or to the number of the talk group?
Thanks very much. I need a clear explanation of what these mean.
Eric WB9JNZ
Thank you very much.
Eric WB9JNZ
#Post#: 138--------------------------------------------------
Re: Shark openspot 2 dmr to nxdn set up
DIR By: N3MEL
Date: December 23, 2018, 9:21 am
---------------------------------------------------------
According to RF Sharks Forum NXDN will operational in the next
firmware release.
#Post#: 147--------------------------------------------------
Re: Shark openspot 2 dmr to nxdn set up
DIR By: robertbretzman
Date: December 23, 2018, 1:09 pm
---------------------------------------------------------
Just was reading the same. It will be interesting to see which
NXDN network. I highly doubt that it will be the current MMDVM
NXDN system as MMDVM is open source.The shark is not open
source.
73
Robert
*****************************************************
Page 1 of 1