DIR Return Create A Forum - Home
---------------------------------------------------------
TGIF.Network
HTML https://tgifnetwork.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: Hotspot Discussions
*****************************************************
#Post#: 4142--------------------------------------------------
PiStar Modify Static stopped working only on my 2 pi zero boards
but not on my 3.0+
DIR By: N1KK
Date: February 16, 2021, 8:59 am
---------------------------------------------------------
Currently not using TGIF PRIME
Looking for some clues why this would happen only with my
pi-zero board but not my pi 3.0+ board.
software on the pi 3.0+ was 4.0 and now the latest 4.1.4, modify
static works with both
The 2 pi zero boards have the problem. Software 3.4.17 and the
latest 4.1.4 both cannot
not do under Admin "Modify Static" I used to be able to do
this with the 2 pi-zero boards.
This is the message I get on the pi zero boards TGIF API: Not
Found
Any tips on why this stopped working on the pi zero boards.
I really need it working so I can unlink when using TG 777
Thanks
Ken
#Post#: 4200--------------------------------------------------
Re: PiStar Modify Static stopped working only on my 2 pi zero
boards but not on my 3.0+
DIR By: N1KK
Date: February 25, 2021, 8:07 am
---------------------------------------------------------
UPDATE: I found if I power down my pi 3.0+ hotspot which works
with
Modify Static and change the pi zero hotspot ESSID number to the
same number
as the 3.0+ ( 01) then the pi zero works with Modify Static
unlinking me from 777.
If I change the same pi zero back to what it was (02) it does
not work.
If I make it NONE, 00, 03,04.... it does not work with Modify
Static.
Would anyone know what is unique to ( 01) that lets the Modify
Static feature
to work on a pi zero board?
*****************************************************
Page 1 of 1