DIR Return Create A Forum - Home
---------------------------------------------------------
TGIF.Network
HTML https://tgifnetwork.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: TGIF Hotspot Configurartion
*****************************************************
#Post#: 4152--------------------------------------------------
Re: "TGIF API: Not Found" Error on New Installation
DIR By: N1KK
Date: February 17, 2021, 7:31 pm
---------------------------------------------------------
I also have the same problem. however the problem is only with
my 2 pi zero boards.
I have a pi 3.0+ board and it works perfectly when I click the
Modify Static button.
My working board was running an earlier version of software
without a problem.
I upgraded the software to 4.1.4 and it still works fine.
The 2 pi zero boards are running 3.1.4.17 Both will not work
when clicking the Modify Static. I get back a message Not
Found.
I tried upgrading one of them to 4.1.4 and same problem.
I would like to fix it. I am not ready to move to Prime yet.
I checked my Firewall in the Pistar software
The top 3 are set to PRIVIATE
Auto AP: ON
uPNP: ON
Any tips would be appreciated.
Thanks, Ken
#Post#: 4153--------------------------------------------------
Re: "TGIF API: Not Found" Error on New Installation
DIR By: KC8ESE
Date: February 17, 2021, 8:30 pm
---------------------------------------------------------
Ken, I'm the original poster of the question and I've been able
to work around the problem by using DMRGateway to connect to
both Legacy and Prime.
That works and now I can use the dashboard to change TGs for
TGIF and the self care for TGIF Prime.
So between 2 open browser tabs I can move around.
I can also manual dial on my radio - 5000777 and key up gets me
to SCAN on TGIF and 4000777 and key up to SCAN on Prime.
5004000 or 4004000 disconnects. 4000318 is the Michigan TG on
Prime, etc.
What I haven't tried is using DMRGateway and only enabling TGIF,
not Prime. In theory that should work and you wouldn't need the
rewrite rules.
If you're interested I can post the working DMRGateway file a
friend of mine worked up (or maybe found, I'm not 100% sure).
73,
-Brian
#Post#: 4187--------------------------------------------------
Re: "TGIF API: Not Found" Error on New Installation
DIR By: N1KK
Date: February 23, 2021, 1:06 pm
---------------------------------------------------------
hello Brian,
I would be interested in your procedure.
What puzzles me is why it works with my pi 3.0+ board and not
the 2 pi zero boards
that have tested also on the latest 4.1.4 update.
I thought maybe because I was using a config backup I was just
dragging over
a problem so I built up a pistar from scratch entering all the
info manually.
Still no go. Yet my 3.0+ board works perfectly. I even went
through all the items in setup
of the 3.0 including EXPERT mode under MMDVM and could not find
any differences.
The only difference between my 3.0+ board and my pi zero boards
is I use a external Nextion 3.2 inch display.
The 2 pi zero boards use the OLED displays. The pi zero boards
used to work to Modify Static giving me a method
to unlink from 777. For some reason both have stopped.
Someone on the TGIF Facebook page has the same problem
Ken
#Post#: 4188--------------------------------------------------
Re: "TGIF API: Not Found" Error on New Installation
DIR By: KC8ESE
Date: February 23, 2021, 1:43 pm
---------------------------------------------------------
Hello Ken-
Sorry this is kind of long but should be all necessary details.
I'm new to all this but I'm computer/Pi/Linux savvy so I've been
digging in.
I'm glad to know I'm not the only one with the issue on the Pi
Zero.
This is what is currently working for me, letting me be on both
networks at the same time for over a week now.
MMDVMHost Configuration:
DMR Mode: on
MMDVM Display Type: OLED type 3 on /dev/ttyAMA0
General Configuration:
All my location settings and STM32-DVM hat, as normal
DMR Configuration:
DMR Master: DRMGateway
All other settings are default (not currently using
Brandmeister)
Attached are a screenshot of my Admin screen (note the displayed
active BM connection despite it being disabled in the
configuration) and my DMRGateway file with my personal
information replaced with "your-xxxxx" for you to fill in.
This setup works for me just fine on the Pi Zero. The Legacy
talkgroups start with 5 and the Prime with 4.
From the radio (you need to pad zeroes to make 7 digits):
Dial 5000777 for Legacy scan
Dial 5031665 for Legacy "TGIF" talkgroup
Dial 50xxxxx for your Legacy talkgroup of choice, padding zeroes
as necessary
Dial 5004000 for Legacy disconnect
Dial 4000777 for Prime scan
Dial 4031665 for Prime "TGIF" talkgroup
Dial 40xxxxx for your Prime talkgroup of choice, padding zeroes
as necessary
Dial 4004000 for Prime disconnect
From the dashboard Admin tab:
Enter your talkgroup of choice (just the TG number), click Link,
and then Modify static to change TGs on Legacy
You can do this while the hotspot is transmitting, for example
to break out of a busy QSO or scan.
From your web browser:
HTML https://prime.tgif.network/profile.php?tab=SelfCare
Enter your Prime talkgroup of choice here. No padding here, just
the straight TG number. Works while the hotspot is transmitting
HTML http://tgif.network
:5040/api/sessions/update/your-dmr-id/1/4000
This will send a 4000 disconnect on Legacy.
You can keep a browser tab open, change the TG number and hit
enter to move around. Redundant since the dashboard works but
interesting.
This combination is letting me move around freely on both
networks - with the radio if the hotspot isn't transmitting and
with the dashboard/self care if it is or if it's more
convenient.
If I switch off DMRGateway and put everything back to just
Legacy settings, it still doesn't work at all. I have no idea
why but I'm not touching anything until the switchover to Prime.
Hope that's helpful to you, Ken, or anyone else who might find
it useful.
73
-Brian, KC8ESE
#Post#: 4190--------------------------------------------------
Re: "TGIF API: Not Found" Error on New Installation
DIR By: N1KK
Date: February 23, 2021, 10:37 pm
---------------------------------------------------------
Well that is quite involved. I did watch a youtube that talked
about what looks to be the same.
I used to have that address to do the unlink but lost it.
I made a shortcut and placed it on my desktop so all I have to
do is click the icon and
it disconnects my hotspot. I have the 2 zero boards and will
make up to shortcut icons for
each of the pi zero boards.
I'll have to think about if I want to get into making new
channels with the leading numbers
so it knows which server to deal with using the gateway.
I heard Prime is getting closer to taking over.
I would still have the problems trying to disconnect when
tethering off my cell
phone unless that web address will work on the cell. If it does
I have to figure out
how I can get around having to type that out every time I need
to disconnect
Thanks
Ken
#Post#: 4193--------------------------------------------------
Re: "TGIF API: Not Found" Error on New Installation
DIR By: N1KK
Date: February 24, 2021, 9:06 am
---------------------------------------------------------
--- Quote from: KG6RUT link ---
>
> Prime aint Prime yet :)....still some growing pains, so dont
expect things to work fully all the time yet...
>
--- End Quote ---
Brian,
You said you where up and running with Prime. Did you notice if
the
Modify Static button worked under Admin in Pistar?
I also tried Prime and even though I could communicate there
was no Modify Static button which brings me back to the same
problem of unlinking when monitoring 777. I believe the Self
Care works
on Prime when your on the same WiFi as your hotspot but in the
mobile tethering
off your cell phone I don't think it will work.
Ken
#Post#: 4196--------------------------------------------------
Re: "TGIF API: Not Found" Error on New Installation
DIR By: KC8ESE
Date: February 24, 2021, 11:40 am
---------------------------------------------------------
Hello Ken-
No, the Modify Static button doesn't appear when you're only
connected to Prime. It only works for Legacy.
As far as I can tell there is no Prime integration to the
Pi-Star dashboard yet, though it should be possible in theory
since Selfcare exists.
I have not yet tried to send commands to the hotspot while
tethered to a phone, though I have seen several places that it's
common not to work so I wouldn't be surprised if you couldn't do
it.
It's probably not worth all the time necessary to build all the
channels since it sounds like the switch-over is close.
73,
-Brian
#Post#: 4199--------------------------------------------------
Re: "TGIF API: Not Found" Error on New Installation
DIR By: N1KK
Date: February 25, 2021, 8:06 am
---------------------------------------------------------
UPDATE: I found if I power down my pi 3.0+ hotspot which works
with
Modify Static and change the pi zero hotspot ESSID number to the
same number
as the 3.0+ ( 01) then the pi zero works with Modify Static
unlinking me from 777.
If I change the same pi zero back to what it was (02) it does
not work.
If I make it NONE, 00, 03,04.... it does not work with Modify
Static.
Would anyone know what is unique to ( 01) that lets the Modify
Static feature
to work on a pi zero board?
*****************************************************
Page 2 of 2
DIR Previous Page