DIR Return Create A Forum - Home
       ---------------------------------------------------------
       TGIF.Network
  HTML https://tgifnetwork.createaforum.com
       ---------------------------------------------------------
       *****************************************************
   DIR Return to: Radios & Code Plug Discussions
       *****************************************************
       #Post#: 2785--------------------------------------------------
       Anytone D878UV Parrot Problem - Private TG Channel DMR Type
       Changing and More
   DIR By: k7cet
       Date: April 20, 2020, 9:40 am
       ---------------------------------------------------------
       Got a new Anytone D878UV PLUS .
       Had trouble getting the Parrot call to work .  Found out the
       main problem was that I had Call Confirmation selected in the
       channel settings .
       Another weird thing I found out is that the channel setting for
       DMR Mode for the private TG 9990 ( Parrot ) changed in the radio
       from the setting in the code plug of Simplex after writing the
       data to the radio .  I tried many times and verified it by
       creating another private TG on a different channel and both of
       them changed after writing to the radio .  They don't change in
       the code plug, of course, but after writing, when I look in the
       settings on the radio, it was changed .
       Now for the weird part . I downloaded a CP from this site that
       Robert K4WZV made .  When I load that CP to the radio, the DMR
       Mode changes from Simplex to Double Slot .   When I load my CP
       to the radio, it changes from Simplex to Repeater .  I tried
       several times, loading each CP over and over and the same
       results occurred .
       The parrot call will work with the DMR Mode set as Simplex or
       Repeater, but not Double Slot .
       ( Note : I found that the DMR Mode for EVERY channel was changed
       - not just the private TG calls )
       Now for the next double ballistic weird thing .
       When I make the parrot call using Robert's CP - I get the usual
       pop up message about the private call and then I have to delete
       it out of the list .
       When I make the parrot call using my CP, I DON'T GET THE POPUP !
       On other radios that I have used, I always got the popup after
       a parrot call .
       Does anyone know how to enable / disable that popup window ?
       Another anomaly is that I get the alert tones in this fashion :
       key up when busy
       idle channel tone
       call tone
       key up
       call tone
       call reset tone
       station receive - after complete
       idle channel tone
       a few seconds after idle channel get
       call reset tone
       Seems to have the call reset and the idle channel sounding at
       the wrong times .
       I submitted a bug report to BridgeCom support about the DMR Type
       being changed .
       *****************************************************
       Page 1 of 1