DIR Return Create A Forum - Home
---------------------------------------------------------
TGIF.Network
HTML https://tgifnetwork.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: TGIF General Questions
*****************************************************
#Post#: 2263--------------------------------------------------
Re: SCAN 777 question
DIR By: ke5cdk
Date: January 25, 2020, 9:53 pm
---------------------------------------------------------
dont think so
web site was working fine this morning
and heard chatter most of the day
#Post#: 2264--------------------------------------------------
Re: SCAN 777 question
DIR By: WB3IHY
Date: January 26, 2020, 10:21 am
---------------------------------------------------------
If the API doesn't work, rebooting the hotspot you're trying to
control will often fix it.
I've had that happen several times over the past couple weeks.
It seems to be related to the work/upgrades currently being
performed on the server.
Understand that, during this time, they may be working on the
underlying code, restarting services, etc. This can disrupt the
API's functionality. Rebooting the hotspot drops and
reestablishes a connection to the server, allowing the API code
to "re-find" it.
Examples include (but not limited to) using the "Talkgroup Drop"
function on Robert/Mitch's TGIF hotspots, using the API code to
change talkgroups, etc.
#Post#: 4194--------------------------------------------------
Re: SCAN 777 question
DIR By: N1KK
Date: February 24, 2021, 10:32 am
---------------------------------------------------------
HTML http://tgif.network
:5040/api/sessions/update/xxxxxxxxx/1/4000
Should this command work to disconnect any one of my specific
hotspots
by adding either 01, 02... etc after where my dmr id goes.
I have 2 pi zero hotspots and 1 pi 3.0+ hotspot.
The modify static button under admin in pistar reports back
TGIF API: Not Found on the 2 pi zero hotspots.
On my pi 3.0 + it works perfectly. The above command used to
work
on all my hotspots just making sure the last 2 digits are for
the specific
hotspot I am trying to unlink from TG 777.
HTML http://tgif.network
:5040/api/sessions/update/xxxxxxxxx/1/4000
only works
on my pi 3.0+ hotspot. When I try the other 2 pi zero boards I
get
a 404 error.
All 3 I have tested with the latest pistar 4.14 with only the
pi 3.0+ hotspot working with the Modify Static button.
This is the same case for the previous versions of pistar.
Ken
#Post#: 4197--------------------------------------------------
Re: SCAN 777 question
DIR By: WB3IHY
Date: February 24, 2021, 12:41 pm
---------------------------------------------------------
Hi Ken,
Yes, it should work equally well for all your hotspots (on the
Legacy server, not Prime) as long as:
A) Each hotspot is on the same external IP as the device/browser
you're using to make the switch AND
B) There is nothing blocking those devices firewall-wise.
You can try the following address to see what the server API is
seeing for the IP you're coming from:
HTML http://tgif.network
:5040/api/sessions
73,
Joe, WB3IHY
#Post#: 4443--------------------------------------------------
Re: SCAN 777 question
DIR By: N1KK
Date: May 3, 2021, 9:29 am
---------------------------------------------------------
This has been working great for sometime now. It's not
working and I am guessing it has something
to do with the switch over to Prime.
Would there be a new link available that works?
Thanks,
Ken
--- Quote from: N1KK link ---
>
> How do I use these links?
> Do I copy and paste into for example Firefox browser?
>
> Ken
>
--- End Quote ---
#Post#: 4520--------------------------------------------------
Re: SCAN 777 question
DIR By: N1KK
Date: June 15, 2021, 10:24 am
---------------------------------------------------------
HTML https://tgif.network
:5040/api/sessions/update/DMRID/1/4000
I have been using the above link to disconnect from TG777 for
some time now.
Today I started getting the following message. If I go to the
self care on the Prime site
it works. I am using Windows 7 with Firefox vs. 62.0.3. The
connection is Ethernet to my router.
The only thing I have done with my
computer recently is install LibreOffice.
I have the same problem with Chrome,
and Epic Privacy browser.
I have 2 Windows 7 Laptops connected via WiFi with the same
version of Firefox and I don't have
a problem. One of the two Laptops also had LibreOffice installed
at the same time.
Any tips how to fix this would be appreciated. Thanks, Ken
(I did fix the problem. I had to remove the https and just use
www in the shortcut link I made and it worked again.)
Secure Connection Failed
An error occurred during a connection to tgif.network:5040. SSL
received a record that exceeded the maximum permissible length.
Error code: SSL_ERROR_RX_RECORD_TOO_LONG
The page you are trying to view cannot be shown because the
authenticity of the received data could not be verified.
#Post#: 4521--------------------------------------------------
Re: SCAN 777 question
DIR By: WB3IHY
Date: June 15, 2021, 12:32 pm
---------------------------------------------------------
--- Quote from: N1KK link ---
>
>
> Any tips how to fix this would be appreciated. Thanks, Ken
>
>
--- End Quote ---
Try using a non-ssl connection by changing
HTML https://tgif.network
:5040/api/sessions/update/DMRID/1/4000 to
HTML http://tgif.network
:5040/api/sessions/update/DMRID/1/4000
73,
Joe, WB3IHY
#Post#: 4773--------------------------------------------------
Re: SCAN 777 question
DIR By: ko4tzu
Date: December 7, 2021, 8:14 am
---------------------------------------------------------
I have a bit different question…When using the 777 scan, the
contact info remains the first contact in a TG and does not
change when other users key up. It will remain until the scan
moves on to another TG and then the same thing. Is there
something I need to do to solve this? I like the scan, but not
knowing who is keyed in is annoying. If this has been address
earlier I apologize, but I didn’t notice it.
Also, would like to get a TGIF spot and run it just for TGIF
network as I have my spot programmed for BM and TGIF, which was
an adventure. What I mean to ask is what is lead time on a new
TGIF spot right now?
Thank you for any help.
Bob-KO4TZU
#Post#: 4774--------------------------------------------------
Re: SCAN 777 question
DIR By: ko4tzu
Date: December 7, 2021, 8:38 am
---------------------------------------------------------
Tried both link with hotspot id put in and can’t connect either
way…??
*****************************************************
Page 2 of 2
DIR Previous Page