DIR Return Create A Forum - Home
       ---------------------------------------------------------
       intcorecycling
  HTML https://styrofoamrecycling.createaforum.com
       ---------------------------------------------------------
       *****************************************************
   DIR Return to: General Discussion
       *****************************************************
       #Post#: 2--------------------------------------------------
       The features of PS plastic cup
       By: INTCOrecycling Date: November 19, 2017, 8:46 pm
       ---------------------------------------------------------
       The cup made of PS plastic is the PS plastic cup, the logo on
       the cup is "6". PS plastic (polystyrene), mainly used for the
       manufacture of disposable plastic cups, bowl of instant noodles,
       foam fast food box material, which in the aviation industry as
       aviation plastic tableware use more. So PS plastic cup is
       disposable.
       PS plastic cup, although the appearance of crystal clear, looks
       like a glass of the feeling, and the cup body heat and cold, but
       this cup should not be used for long-term life, and can not be
       placed in the microwave, so as to avoid high temperature and the
       release of chemicals. And it can not be used to contain strong
       acid (such as orange juice), strong alkaline substances.
       Otherwise, it will do harm to human beings and also will cause
       the white pollution.
  HTML http://www.everythinglongbeach.com/wp-content/uploads/2010/01/styrofoam-recycling.jpg
       From this, PS plastic cup should not be used for a long time.
       But if the PS material applied to the car or other areas, its
       characteristics are still very significant. And the following is
       the PS plastic material features.
       1, PS has a very good geometric stability, thermal stability,
       optical transmission properties, electrical insulation
       properties and a small tendency to absorb moisture, which can be
       resistant to water, diluted inorganic acid.
       2, the heat capacity is small, heating flow and cooling
       assimilation is fast, melt viscosity is moderate, and has a good
       mobility.
       3, PS on the temperature, shear rate are more sensitive to the
       temperature and pressure to improve the melt viscosity
       decreased, increased mobility.
  HTML http://www.wordenfamilyassoc.org/FWUMC/creation-care-team/Styrofoam%20Recycling%20at%20FWUMC/6%20recycle.png
       Since the PS plastic cup can be recycled for production similar
       to that of a CD case, an automobile part, etc., it is also a
       more environmentally friendly product that can be recycled
       through a Styrofoam
       compactor
  HTML http://www.intcorecycling.com/Manufacture-EPS-Compactor.html
  HTML http://www.intcorecycling.com/Manufacture-EPS-Compactor.html.<br
       />And then we can reuse the waste resources to do other products
       such as frames.
       *****************************************************