DIR Return Create A Forum - Home
---------------------------------------------------------
Shoot NI
HTML https://shootni.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: Shotguns Only
*****************************************************
#Post#: 29754--------------------------------------------------
sx3 jamming
DIR By: ducky1234
Date: November 3, 2015, 2:28 am
---------------------------------------------------------
hi,, does anyone no off anyone in N,Ireland that would be able
to fix a winchester sx3,,, when i fire one cartridge and go to
put another in there one jammed in the bottom and ive stripped
it and cant figure it out... any help plz
#Post#: 29755--------------------------------------------------
Re: sx3 jamming
DIR By: Cannon
Date: November 3, 2015, 3:00 am
---------------------------------------------------------
From reading what you've wrote I can't picture what you are
talking about. Have you checked your gas piston spring to make
sure it hasn't snapped? Are you using 24g loads and up?
#Post#: 29756--------------------------------------------------
Re: sx3 jamming
DIR By: ducky1234
Date: November 3, 2015, 3:04 am
---------------------------------------------------------
when i fire one cartridge it ejects and another comes up but the
third cartridge comes out of the magazine tube and sits below
the firing pin part if u no wot i mean lol.. i fire 34 gram up
to 56g...
#Post#: 29757--------------------------------------------------
Re: sx3 jamming
DIR By: ducky1234
Date: November 3, 2015, 3:05 am
---------------------------------------------------------
ive stripped it checked the piston just cant figure it out
#Post#: 29758--------------------------------------------------
Re: sx3 jamming
DIR By: Cannon
Date: November 3, 2015, 3:54 am
---------------------------------------------------------
If you load the gun and manually cycle the rounds using the
cocking lever, does the same thing happen?
#Post#: 29759--------------------------------------------------
Re: sx3 jamming
DIR By: ducky1234
Date: November 3, 2015, 3:58 am
---------------------------------------------------------
yeah doing my nut in,,
#Post#: 29760--------------------------------------------------
Re: sx3 jamming
DIR By: Cannon
Date: November 3, 2015, 4:02 am
---------------------------------------------------------
You will either need a new interrupter latch, or have the old
one repaired. You can weld an extra bit of metal on and file it
to suit.
#Post#: 29761--------------------------------------------------
Re: sx3 jamming
DIR By: ducky1234
Date: November 3, 2015, 4:10 am
---------------------------------------------------------
is that the Cartridge stop/carrier latch assembly u mean?
#Post#: 29762--------------------------------------------------
Re: sx3 jamming
DIR By: Cannon
Date: November 3, 2015, 5:03 am
---------------------------------------------------------
It's the bit that stops the cartridges coming back out of the
mag tube. If you press the loading flap so that it touches the
base of the bolt so to speak, you can press the latch in to
manually release the cartridges from the tube. It's this latch
that needs fixed or replaced
#Post#: 29763--------------------------------------------------
Re: sx3 jamming
DIR By: ducky1234
Date: November 3, 2015, 5:18 am
---------------------------------------------------------
yeah i no wot u mean now cheers,,, any idea were i could order
the parts?
*****************************************************
Page 1 of 2
DIR Next Page