URI:
   DIR Return Create A Forum - Home
       ---------------------------------------------------------
       Shoot NI
  HTML https://shootni.createaforum.com
       ---------------------------------------------------------
       *****************************************************
   DIR Return to: Rimfire & Centrefire
       *****************************************************
       #Post#: 29098--------------------------------------------------
       CZ455 0.17 Delayed firing & cracked casings
       By: John2000 Date: March 4, 2015, 4:33 am
       ---------------------------------------------------------
       Hello
       I got a new CZ455 0.17 HMR last week.
       I have fired a box of Federal Premium ammo at this stage and
       have noted the following:
       At least 20 of the 50 used casings ended up with a crack in the
       necked area of the casing.
       Every 10 shots approx. I get a very short time delay before the
       gun fires. What I mean is when I pull the trigger and nothing
       happens, then the shot goes off. Its hard to quantify the time
       delay but it feels less than 1 second. Also the recoil feels a
       little more that it normally does.
       Anybody else experience this?
       Is this a problem with the firing pin/bolt in the rifle or could
       the ammo be the problem.
       Also, the cracked casing - is the barrel inner diameter
       oversized or just poor ammo.
       All replies welcome.
       Thanks in advance.
       #Post#: 29099--------------------------------------------------
       Re: CZ455 0.17 Delayed firing & cracked casings
       By: foxyloxy Date: March 4, 2015, 5:17 am
       ---------------------------------------------------------
       Nothing wrong with yer gun mate.
       Take the rest of the ammo & the split brass back to the dealer.
       Your ammo is not safe to be using!
       #Post#: 29100--------------------------------------------------
       Re: CZ455 0.17 Delayed firing & cracked casings
       By: John2000 Date: March 4, 2015, 5:37 am
       ---------------------------------------------------------
       Thank you for the reply. Good to know there is nothing wrong
       with the rifle.
       All that batch have been fired at this stage but I will keep an
       eye on the next batch I get.
       In what way is this ammo dangerous - to me or the rifle - Can
       the cracked casings cause any damage to the rifling?
       Thanks. ;D
       #Post#: 29101--------------------------------------------------
       Re: CZ455 0.17 Delayed firing & cracked casings
       By: foxyloxy Date: March 4, 2015, 7:22 am
       ---------------------------------------------------------
       Thers a chance you could have a partial firing, ie when you pull
       the trigger the bullet leaves the case & enters the rifling just
       far enough for you to chamber another round behind it, if you
       fire the second round - your in deep doo doo!
       #Post#: 29102--------------------------------------------------
       Re: CZ455 0.17 Delayed firing & cracked casings
       By: Pauli 1 Date: March 4, 2015, 8:59 am
       ---------------------------------------------------------
       what sort of ammo?  sounds like dung.
       #Post#: 29131--------------------------------------------------
       Re: CZ455 0.17 Delayed firing & cracked casings
       By: SBeggs539 Date: March 9, 2015, 4:13 pm
       ---------------------------------------------------------
       had the same problem a while ago, there was a batch of federal
       ammo made and it was crap split casing and missfires and delays,
       have shot thousands of rounds of it and never had a problem
       since,
       *****************************************************