DIR Return Create A Forum - Home
       ---------------------------------------------------------
       The Old Landrover Arms
  HTML https://seriouslyseries.createaforum.com
       ---------------------------------------------------------
       *****************************************************
   DIR Return to: What Have You Done to Your Leafer Today?
       *****************************************************
       #Post#: 64123--------------------------------------------------
       11" brakes onto 10" 2a
       By: mickandpaula101 Date: January 20, 2024, 11:37 am
       ---------------------------------------------------------
       put 11"brakes onto 2a,how,where does the vacuum draw from the
       engine.trying to get the old m/c to work the new brakes before
       going servo.no joy yet cheers mick
       #Post#: 64124--------------------------------------------------
       Re: 11" brakes onto 10" 2a
       By: Sunny Jim Date: January 23, 2024, 9:04 am
       ---------------------------------------------------------
       I would have thought you'd need to change the master cylinder if
       you are going from single to twin leading shoes?
       When I fitted the servo to mine, I had to drill and tap the
       blank on the inlet manifold, then fit the adapter part, and
       elbow pipe. I did it in the workshop at my former employer,
       rather than try and do it at home. Later inlet manifolds have a
       blanking plug.
       If you fit the standard pedal mounted servo, you would need a
       different master cylinder anyway.
       I am assuming it is petrol, diesel is different of course, and
       not within my experience!
       Sunny Jim
       *****************************************************