DIR Return Create A Forum - Home
---------------------------------------------------------
The Old Landrover Arms
HTML https://seriouslyseries.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: What Else Have You Been Up To?
*****************************************************
#Post#: 64026--------------------------------------------------
winget mixer
By: mickandpaula101 Date: July 8, 2022, 3:01 am
---------------------------------------------------------
trying to get an old(1950's maybe) winget mixer and an
old(1960's maybe)all british wonder mixer working.lister in one
and petter in the other.all fee and turning but no spark on
either.as they've been stood for over 30 years do the mag s need
re polarising or some magic from the past.any ideas
please.cheers. mick
#Post#: 64030--------------------------------------------------
Re: winget mixer
By: strang Date: July 12, 2022, 12:08 pm
---------------------------------------------------------
Is the engine a Lister D - tall upright rectangular, with large
flywheel. There are several groups of facebook for these
engines.
#Post#: 64031--------------------------------------------------
Re: winget mixer
By: Puddlejumper Date: July 14, 2022, 2:34 am
---------------------------------------------------------
Most likely will be the magnetos need a quick rebuild. There are
a few folk out there who do this just Google “magneto rebuild
near me”
#Post#: 64032--------------------------------------------------
Re: winget mixer
By: mickandpaula101 Date: July 14, 2022, 6:27 am
---------------------------------------------------------
cheers chaps,it does seem to be a lister d in one.mag rebuild
next then.was given both mixers to build our extension,towed
them home(cast iron whheels) and freed everything up ,not bad
after standing outside for twenty odd years.be good to see them
work .would post a pic but our internet is too slow to upload
photo s smart stuff
#Post#: 64035--------------------------------------------------
Re: winget mixer
By: mickandpaula101 Date: July 24, 2022, 11:24 am
---------------------------------------------------------
petter A1 in the winget.just gone half's on a benford mantis so
digging out begun.mag's on mixers still need sorting ,may try
old series condensers first as lister condensers on ebay are 49
quid
#Post#: 64036--------------------------------------------------
Re: winget mixer
By: mistericeman Date: July 26, 2022, 5:02 am
---------------------------------------------------------
Worth taking the mags off and sticking th in a warm dry place
for a week or so (airing cupboard etc)
They often get damp in the windings when they've been stood for
for a while....
Worth a try at least.
#Post#: 64037--------------------------------------------------
Re: winget mixer
By: mickandpaula101 Date: July 27, 2022, 3:28 am
---------------------------------------------------------
cheers ,will get em off later
*****************************************************