DIR Return Create A Forum - Home
---------------------------------------------------------
The Old Landrover Arms
HTML https://seriouslyseries.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: The Landrover Gallery
*****************************************************
#Post#: 40622--------------------------------------------------
KEG (Sara's 109)
By: lozzaboy Date: April 16, 2016, 6:19 am
---------------------------------------------------------
Just realised theres no thread for Keg here whstle so to get
started heres the Stage 1 rear axle we got from Drew for Keg,
after being shot blasted and primed found out the shock mounts
were buggered Skd so thinking they would be the same as
Debender ones ordered some from YRM. arrived, very well made,
but not the same as I thought FRSsml my own fault so set about
making them fit instead wdesmle
HTML http://i.imgur.com/FbxhkKhh.jpg
HTML http://imgur.com/FbxhkKh
HTML http://i.imgur.com/OANy8aoh.jpg
HTML http://imgur.com/OANy8ao
HTML http://i.imgur.com/DdKAtbCh.jpg
HTML http://imgur.com/DdKAtbC
HTML http://i.imgur.com/RBrTKYEh.jpg
HTML http://imgur.com/RBrTKYE
HTML http://i.imgur.com/lWjS5igh.jpg
HTML http://imgur.com/lWjS5ig
Need to cut a big hole soon for this wdesmle
HTML http://i.imgur.com/wZnbB8kh.jpg
HTML http://imgur.com/wZnbB8k
#Post#: 40705--------------------------------------------------
Re: KEG (Sara's 109)
By: lozzaboy Date: April 17, 2016, 4:44 pm
---------------------------------------------------------
Sorted out the pipework for the air filter, turbo and
intercooler this afternoon after giving the footwell a good
coating of paint and stone guard beforehand
HTML http://i.imgur.com/zdTL1l0h.jpg
HTML http://imgur.com/zdTL1l0
After seeing how Munkie had done this set up on Brenda and
noticing that the pipe from the turbo was catching the bulkhead
support bracket I made my own bracket to overcome this problem
HTML http://i.imgur.com/HvtxdjFh.jpg
HTML http://imgur.com/HvtxdjF
#Post#: 41008--------------------------------------------------
Re: KEG (Sara's 109)
By: westy Date: April 23, 2016, 2:41 pm
---------------------------------------------------------
Alternator pulley is out of line with the water pump. Might
cause you trouble in the future
#Post#: 41011--------------------------------------------------
Re: KEG (Sara's 109)
By: Nuggs Date: April 23, 2016, 3:01 pm
---------------------------------------------------------
Still !!!!!! rbchn
#Post#: 41014--------------------------------------------------
Re: KEG (Sara's 109)
By: lozzaboy Date: April 23, 2016, 3:24 pm
---------------------------------------------------------
Got bits to correct that now don't worry ;)
#Post#: 41015--------------------------------------------------
Re: KEG (Sara's 109)
By: Nuggs Date: April 23, 2016, 3:49 pm
---------------------------------------------------------
Another one or two nuts ?
#Post#: 41016--------------------------------------------------
Re: KEG (Sara's 109)
By: lozzaboy Date: April 23, 2016, 3:53 pm
---------------------------------------------------------
Nope, longer mobility hoist support posts from work wdesmle
#Post#: 41502--------------------------------------------------
Re: KEG (Sara's 109)
By: lozzaboy Date: May 2, 2016, 12:55 pm
---------------------------------------------------------
Took the Wolf locker to work this week and when it was quite
took the chance to give it a clean up and paint ready to fit at
the weekend. A bit of measuring and a bit hole appears!!!
HTML http://i.imgur.com/4XBGmxmh.jpg
HTML http://imgur.com/4XBGmxm
After carefully cutting and grinding it back just enough, and
cutting the right side down to clear the rear bulkhead slope the
first proper test fit happened!!! (Had to cut away a
strengthening plate at the top and behind where the locker goes
to fit it too)
HTML http://i.imgur.com/oWnXOvfh.jpg
HTML http://imgur.com/oWnXOvf
Then took the time to clean up, paint and rustproof the area
before fitting.
HTML http://i.imgur.com/29NXyVSh.jpg
HTML http://imgur.com/29NXyVS
HTML http://i.imgur.com/Yi8MYYZh.jpg
HTML http://imgur.com/Yi8MYYZ
Then slid it into place, holes drilled and riveted in, along
with a couple of additional bolts in the top and rear corners,
along with the new battery cables passed through into it too
through a larger hole drilled out before with a holesaw.
HTML http://i.imgur.com/8QwedtBh.jpg
HTML http://imgur.com/8QwedtB
#Post#: 45960--------------------------------------------------
Re: KEG (Sara's 109)
By: lozzaboy Date: August 21, 2016, 3:23 pm
---------------------------------------------------------
Little bit more progress today after a bit of a clear out around
here, stripped down the spare axle in the week for the back
plates and a few other bits for other people and and got the
Stage one axle stripped ready for the new back plates.
HTML http://i.imgur.com/JPGazMfh.jpg
HTML http://imgur.com/JPGazMf
Replacement backplates cleaned up and given a coat of black
paint before fitting and longer studs for the Wolf rims fitted
too.
HTML http://i.imgur.com/k5uH5Mqh.jpg
HTML http://imgur.com/k5uH5Mq
Need a new seal for the N/S hub so chucked a bit of black paint
on the O/S hub and some old drums ons for now until the brakes
from the current axle get checked over and transferred over.
HTML http://i.imgur.com/ijMwXgWh.jpg
HTML http://imgur.com/ijMwXgW
#Post#: 46524--------------------------------------------------
Re: KEG (Sara's 109)
By: lozzaboy Date: September 3, 2016, 7:18 am
---------------------------------------------------------
Still need to get a seal for that rear hub so this morning I
finished off cleaning all the old army paint from the windscreen
that I started doing in the week and re-done the bottom welds on
the front cross member, as it wasn't very well done back at
Sara's parents house when we removed the power steering etc.
HTML http://i.imgur.com/q8lCDukh.jpg
HTML http://imgur.com/q8lCDuk
HTML http://i.imgur.com/JSUJLB8h.jpg
HTML http://imgur.com/JSUJLB8
*****************************************************
DIR Next Page