DIR Return Create A Forum - Home
---------------------------------------------------------
Road2HardCoreIron
HTML https://road2hardcoreiron.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: HGH/ IGF1/ SLIN & Peptides
*****************************************************
#Post#: 677--------------------------------------------------
MEASURING HGH
DIR By: Road2HardCoreIron
Date: May 22, 2022, 6:24 pm
---------------------------------------------------------
HOW TO USE - HGH
First be advised that the only true form of hGH comes in the
form of a lyophilized powder, any other form that you see
advertised or offered is NOT true hGH. The only way to
administer true HGH is by subcutaneous or intra-muscular
injection.
hGH is fragile and needs to be protected from both the light and
the heat. hGH should be stored in a cool fridge 36 - 46 degrees
Fahrenheit or 2-6 degrees Centigrade;before and after its
reconstitution UNLESS... you are using the product JTPN or
SAIZEN. Almost all brands of somatropin (hGh) need to be stored,
shipped and remain in a refridgerated location. There only two
brands (that I know of) that can survive normal room temperature
during storage and shipping; however only before mixture or
reconstitution. ALL BRANDS need to be refridgerated after being
reconstituted (mixing the lyophilized poweder and the
bacteriostatic water).
RECONSTITUTING AND MEASURING hGH
Your vial of hGH (either JTPN, SAIZEN, SEROSTIM, CRYOTROPIN,
GENTROPIN, JINOTROPIN, NORDITROPIN etc..) is in the form of a
lyophilized powder and comes with a small bottle of
bacterostatic water for mixing. The amount of the powder should
be indicated on the vial, it will stated Units (IU's) or
Milligrams (mg). If in milligrams the conversion is precisely
1mg=2.7IU but they state in general taht 1mg = 3IU's so 4IU's
equal 1.33mg. As a phyhsician I use the precise measurement but
most people use the 1mg = 3IU's since that is the standard
commonly referenced by mfgs.
We will add the bacteriostatic water (or sterile water) to the
lyophilized powder {some patients and physicians i've spoken
with during my experience of 20years on this product use liquid
vitamin B12 to reconstitute} and thus prepare for injection.
What you choose to reconstitute hGH with depends on how rapidly
we use the GH. Bacteriostatic water is basically sterile water
with 0.9% Benzyl Alcohol added, and this Alcohol keeps anything
from growing in the water, thus making it safe for injection for
the longest amount of time, about three to three 1/2 weeks. If
the amount of GH in our vial is enough to last for a few weeks
at our desired daily dosage then bacteriostatic water is the way
to go and diluent of choice. Many users {for bodybuilding use
about 2-5 IU's a day} and remember most vials will be used up
long before any bacteria begins to grow in the reconstitutedhGH.
So it's really a personal preference which diluent you use.
RECONSTITUTING
1.) Take some alcohol and swab the stopper {top of the vial} of
your hGH vial and the dilutent water.
2.) Take a 3cc syringe with a 23 or 25 gauge needle (1" or 1.5")
and draw up the amount of your preferred dilutent. The amount
isn't critical, other than making sure you know exactly how much
you have used. The rule of thumb is choose an amount that will
make measuring the final product easy
Example: 1ml (cc) per 10IU vial of hGH means each 10 mark on
U100 syringe equals 1 IU of HGH
2ml (cc) added to a 10 IU vial of HGH means each 20 mark on a
U100 syringe equal 1 IU of HGH
3ml (cc) added to a 10 IU vial of HGH means the 30 mark on U100
syringe would equal 1 IU of HGH
3.) Then you take the syringe {alread having the dilutent} and
push it into the vial contianing the lyophilized powder, you may
want to angle it so that the needle touches the side of the
vial, and avoiding injecting the dilutent directly onto the
lyophilized powder, you want to make it run slowly down the side
of the vial (don't force it all at once or don't rush it in).
4.) After all of the dilutent has been added to the vial of hGH,
gentlly swirl (but do NOT agitate or violently shake the vial)
until the lyophilized powder has dissolved and you are left with
a clear liquid. The hGH is now ready for use. Store your
reconstituted hGH in the refrigerator and if you used
bacteriostatic water to reconstitute, it will be good for about
three weeks. If you used sterile water, then it will only be
good for about 4 -5 days.
MEASURING
After you have reconstituted the hGH, you need to know how to
measaure the amount for injection right? You need to use a U-100
Insulin Syringe to draw and inject the hGH. Here's how: since
you know the amount of IU's in your HGH vial and you know how
much water you have diluted it with, just divide as listed
below: You need to know the following -
1ml = 1cc = 100 IU's
So take the number of IU's of the hGH off of the label of the
lyophilized powder (most common is 4 or 10iu's) divide that into
the amount of dilutent we used.
Example-
We used 1cc or a ml of water; we also have a 10 IU vial of hGH.
We know from above that 1cc = 100 IU's, so we have 100 IU's of
water.
We now divide the 100 IU's (the amount of our water) by 10 IU's
(the amount of hGH)
100 IU / 10 IU = 10
This 10 will perfectly correspond with the markings on a U100
insulin syringe. In our example, every 10 mark on the syringe
will equal 1 IU of hGH. You want to draw 2 IU's of GH? ....draw
out to the 20 mark on the syringe.
SUMMARY:
1.) How much actual hGH you are dealing with (read the vial 4IU
or 10IU?)
2.) How much water (dilutent) are you using to add to the hGH.
3.) Divide the amount of water in units by the amount of hGH in
units.
4.) This result will equal the measurement on your U100 Insulin
syringe per unit of GH.
5.) multiply the number you get {same as in step 4} by how many
units you want to inject. This is the number to draw to on your
syringe.
*****************************************************
Page 1 of 1