DIR Return Create A Forum - Home
       ---------------------------------------------------------
       Paleo Project
  HTML https://paleoproject.createaforum.com
       ---------------------------------------------------------
       *****************************************************
   DIR Return to: Prop's/Replica's Section
       *****************************************************
       #Post#: 71--------------------------------------------------
       How To Make A Isla Nublar Sign
       By: Dr. Dromaeosaurus Date: April 19, 2012, 9:02 pm
       ---------------------------------------------------------
       1. Find a wooden pole, about as big as you, depending on how
       tall you are, and paint it white. let that dry, and work on the
       poster sign.
       2. Take a thin, but thick piece of wood about 7 feet by 7 feet.
       Right now, paint it all white, and wait for that to dry.
       3. After it dry's, cut ths poster wood into the shape of Isla
       Nublar, with a circle curving around the West side of the
       drawing. If you want accuracy, sketch the basic shape of
       JPLegacy's Isla Nublar.
       4. Now, paint the perimeter of the 'island', white. Be careful
       with the edges!
       5. Next, carefully make a nice circle starting where the circle
       is, and from there, paint the perimeter of that circle white.
       6. Now, carefully paint the parts around the circle black, but
       make sure you dont have any,'white spots', on where the black
       should be.
       7. Find a good picture of what species/place you want the sign
       to represent! In my case, find a detailed Allosaurus skull, in
       2-D mode.
       8. Carefully sketch the picture and enlarge it to meet the size
       of the circle, but make sure it's not too big.
       9. After you draw the picture in, carefully trace the drawing in
       black, and leave the outer area of the picture blue. In the case
       of the East dock sign, carefully paint in blue around the
       picture, and mark in any 'white spots'.
       10. Take the board you painted a while back, and find a good
       size nail, and hammer the nail into a good spot on the front of
       the sign. If you dislike the color of the nail in the black,
       color it to whatever color the outer of the sign is.
       11. Download the Jurassic Park font, make a large text image,
       label it whatever you want to call the sign/species, and nail it
       into the sign. Repeat the procces if you want a arrow leading to
       the area/place.
       12. Volia!! You have created your own Jurassic Park sign!! Feel
       proud of yourself!
       *****************************************************