DIR Return Create A Forum - Home
       ---------------------------------------------------------
       Example forum
  HTML https://osudevtbshoot.createaforum.com
       ---------------------------------------------------------
       *****************************************************
   DIR Return to: General Discussion
       *****************************************************
       #Post#: 65--------------------------------------------------
       Lab 4 AM Waveform
   DIR By: Abigail McCrary
       Date: September 29, 2025, 7:26 pm
       ---------------------------------------------------------
       Are there supposed to be both the 1kHz wave and the 100Hz wave
       from output 1 on the function generator? I am looking to have
       the OScope look like my prelab, but I am a little confused on if
       both the carrier wave and baseband waves are supposed to be at
       the same output.
       #Post#: 66--------------------------------------------------
       Re: Lab 4 AM Waveform
   DIR By: Kaden Rhodes
       Date: September 29, 2025, 7:31 pm
       ---------------------------------------------------------
       On the function generator, set ModFreq = 1kHz using the Mode
       button to navigate into the Mod, then into AM, and then into the
       carrier settings. The Carrier will be 1kHz, and the baseband
       will be 100 Hz at 4 Vpp.
       #Post#: 103--------------------------------------------------
       Re: Lab 4 AM Waveform
   DIR By: Abigail McCrary
       Date: October 15, 2025, 7:18 pm
       ---------------------------------------------------------
       Thank you for your help! With your advice I was able to get it
       working!!
       *****************************************************
       Page 1 of 1