DIR Return Create A Forum - Home
       ---------------------------------------------------------
       Origins HL2RP
  HTML https://originsforums.createaforum.com
       ---------------------------------------------------------
       *****************************************************
   DIR Return to: IC Section
       *****************************************************
       #Post#: 157--------------------------------------------------
       UU File #520743: MPF-i17.GRID.05.605 log #1
       By: lawfulpotato Date: October 21, 2017, 9:26 pm
       ---------------------------------------------------------
       [center]<:: Accessing file #520743: MPF-i17.GRID.05.605 log
       #1::>[/center]
       Input Password: *************
       [center]<::Password accepted::>
       <::Accessing requested document ::>
       <:: Warning: This information is restricted to members of the
       Metro Police Force. Leaking information seen in this document
       will result in demotion or amputation::>[/center]
       This file is for all members of the MPF. Use this to keep your
       weapons in peak condition as to avoid any malfunctions should
       you get into an S34 with an anti-citizen.
       This file goes over the Field Strip and Complete Disassembly
       Procedures of the standard issue weapons of the Metro Police
       Force, the H&K USP Match, Colt Python, H&K MP7, and Franchi
       SPAS-12.
       Disclaimer, I do assume you know a few things:
       That you know to take any external magazine out of a weapon
       BEFORE Field Stripping or Disassembling
       That you know to remove any round from the chamber of a weapon
       BEFORE Field Stripping or Disassembling
       That you know to separate an obvious spring that isn’t welded
       onto another component of the weapon
       That you have the brainpower to keep a spring that goes with a
       certain component of a weapon with the component that it goes
       with
       That you know that in order to Re-Assemble your weapon you go
       backwards through the Disassembly/Field Stripping Procedures
       Should you need any of these items for one reason or another
       speak with you local GRID member.
       Additionally, if you are of a lower rank, you may notice only
       one or two of these items show up, this is because I have set it
       up so that depending on the password you input will result in
       the weapons changing, so as to avoid an 05 getting his hands on
       how to assemble a SPAS-12. Only weapons your rank has access to
       will show up below. (OOC: aka ICly you would only see the USP
       Match as an 05 and such)
       [right]-GRID 605[/right]
       First the H&K USP Match
       Field Strip:
       Remove Slide Release
       Remove Slide Assembly
       Remove Recoil Spring Guide Rod
       Remove Barrel
       And Disassembly:
       Remove Front and Back Sights from slide
       Remove Firing Pin Assembly
       Remove Extractor Assembly
       Back to the Frame
       Remove Magazine Release Assembly
       Remove Sear Axle
       Remove Detent Plate
       Remove Disconnector
       Remove Magazine Release
       Remove Sear
       Remove Control Level
       Remove Flat Spring
       Remove Detent Slide
       Remove Hammer Axle
       Remove Hammer
       Remove Trigger Bar
       Remove Trigger Bar Detent
       Remove Trigger Assembly
       Onto the MP7
       Field Strip:
       Remove BackPlate Assembly
       Remove Bolt Carrier from BackPlate
       Remove Firing Pin Assembly and Bolt Head from Bolt Carrier
       Remove Recoil Spring Guide
       Remove Charging Handle
       Disassembly:
       Remove the Firing Pin Safety Assembly from Bolt Carrier
       Remove ButtStock
       Remove Buttstock Cap Assembly
       Remove Buttstock Release Lever Assembly
       Remove Buffer
       Remove Front Grip Assembly from Frame
       Remove Left and Right Picatinny Rails
       Remove Barrel Attachment
       Remove Front and Rear Sight
       Remove Top Picatinny Rail
       Remove Front Cap
       Remove Gas Port
       Remove Barrel Nut
       Remove Barrel
       Remove Trigger Housing
       Remove Sear Assembly
       Remove Hammer Assembly
       Remove Magazine Catch Assembly
       Remove Safety Lever Assembly
       Remove Trigger Assembly
       Remove Bolt Catch Release Assembly
       SPAS-12
       Field Strip:
       Remove Magazine Extension
       Remove Magazine Assembly
       Remove Barrel Handguard Bolt Slide
       Remove Gas Piston
       Remove Breech Block Slide
       Disassembly
       Remove Sleeve Valve Friction Spring
       Remove Cut Off Assembly
       Remove Magazine Tube
       Remove Trigger Plate
       Remove Grip Retaining Screw
       Remove Grip
       Remove Receiver Shock Absorber
       Remove Carrier Latch Assembly
       Remove Sights
       Remove Thread Protection Bush
       Remove Handguard
       Remove Slide Action Sleeve
       Finally, the Colt Python
       Field Strip
       Open Crane Assembly
       Remove Crane Lock Screw
       Remove Crane
       Remove Target Lock Screw
       Remove Left & Right Grips
       Remove Sideplate Front Screw
       Remove Sideplate Target Screw
       Remove Sideplate
       Disassembly
       Remove Ratchet from Crane
       Remove Ejector Rod Head
       Remove Cylinder
       Remove Crane Bushing
       Remove Ejector Rod
       Remove Mainspring from Frame
       Remove Hand
       Remove Rebound Lever
       Remove Hammer
       Remove Trigger
       Remove Safety Lever
       Remove Hammer Pin
       Remove Latch Pin
       Remove Trigger Pin
       Remove Bolt Screw
       Remove Bolt
       Remove Safety
       Remove Rear Sight
       Remove Barrel
       Remove Firing Pin
       Remove Front Sight
       [center]<::Closing File…::>
       <::File Closed. Returning to main Directory::>[/center]
       *****************************************************