DIR Return Create A Forum - Home
---------------------------------------------------------
Old Leafsprung Land Rovers
HTML https://ollr.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: Technical tips & Questions
*****************************************************
#Post#: 98912--------------------------------------------------
gearbox help
DIR By: poprodder
Date: September 8, 2015, 2:30 am
---------------------------------------------------------
hi,
maybe a stupid question but will this fit onto a 2.5n/a engine?
does'nt matter if engine needs moving or anything, just if they
will fit together and run?
HTML http://imagehosting.rodsnsods.co.uk/555ee8defaa921.jpg
cheers chris.
#Post#: 98917--------------------------------------------------
Re: gearbox help
DIR By: AlexB
Date: September 9, 2015, 1:59 pm
---------------------------------------------------------
The early 90s had 2.5 diesels and lt77s, so yes
#Post#: 98920--------------------------------------------------
Re: gearbox help
DIR By: Doug_T
Date: September 9, 2015, 5:29 pm
---------------------------------------------------------
That looks like an R380 from a 300 TDi Discovery (going by the
bellhousing and the position of the reverse light switch). You
can do 300 TDi engine to Series box, so I'd imagine you could do
R380 to 2.5 N/A (with a bit of jiggery-pokery).
It also looks like the mainshaft output splines have suffered a
bit.
#Post#: 98988--------------------------------------------------
Re: gearbox help
DIR By: w3526602
Date: September 22, 2015, 2:54 am
---------------------------------------------------------
Hi,
I has been done, apparently successfully. Recently discussed on
the S2C forum, with pictures of gearbox in situ.
If used with TDi engine and 3.5 diffs, it will give the same
power train as a Disco, but more than half a ton lighter.
602
#Post#: 99085--------------------------------------------------
Re: gearbox help
DIR By: poprodder
Date: September 29, 2015, 3:53 am
---------------------------------------------------------
cheers guys,
i've ended up with this.
HTML http://imagehosting.rodsnsods.co.uk/5560a510e5e2c9.jpg
HTML http://imagehosting.rodsnsods.co.uk/5560a510f137b2.jpg
HTML http://imagehosting.rodsnsods.co.uk/5560a510f80aed.jpg
been told it could be from a 2a?
what clutch do i need to fit to a 2.5?(please tell me it still
fits!!!!)
thanks chris.
#Post#: 99174--------------------------------------------------
Re: gearbox help
DIR By: spanner rash
Date: October 7, 2015, 4:24 pm
---------------------------------------------------------
571228 (9 1/2 ") clutch pressure plate works for this release
mechanism ( so does earlier 9" 591705 but perhaps more fragile
behind a 2.5) but not sure if it will fit the 2.5 flywheel...
not too hard to drill and tap new fixing holes and grind off
locating pegs on the flywheel if they don't line up though.
#Post#: 99205--------------------------------------------------
Re: gearbox help
DIR By: poprodder
Date: October 9, 2015, 10:18 am
---------------------------------------------------------
cheers, thank you.
*****************************************************
Page 1 of 1