gopher.createaforum.com/1/forums/ollr/p/9043

   DIR Return Create A Forum - Home
       ---------------------------------------------------------
       Old Leafsprung Land Rovers
  HTML https://ollr.createaforum.com
       ---------------------------------------------------------
       *****************************************************
   DIR Return to: Technical tips &amp; Questions
       *****************************************************
       #Post#: 95885--------------------------------------------------
       diesel on to a 2.6 box
   DIR By: dazzlebrush
       Date: February 1, 2015, 1:59 pm
       ---------------------------------------------------------
       has anyone ever fitted a 2 1/4 diesel engine on to a 2.6 petrol
       box and what bell housing did you use
       #Post#: 95886--------------------------------------------------
       Re: diesel on to a 2.6 box
   DIR By: AlexB
       Date: February 1, 2015, 2:12 pm
       ---------------------------------------------------------
       THe boxes are interchangeable - you just need to change to a 4
       pot bell housing that is compatible. Ideally the same suffix as
       the 6 pot box
       #Post#: 95894--------------------------------------------------
       Re: diesel on to a 2.6 box
   DIR By: Albert Ross
       Date: February 1, 2015, 4:21 pm
       ---------------------------------------------------------
       If it's a 2a box, D suffix onwards 2a bellhousings will fit
       (Only the one clutch release hole, on the offside, and large
       layshaft front bearing) or a S3 one will fit, but you need to
       make sure you have S3 clutch parts. If it's a S3 box, then all
       S3 bits will swap like for like.
       *****************************************************
       Page 1 of 1