DIR Return Create A Forum - Home
---------------------------------------------------------
Old Leafsprung Land Rovers
HTML https://ollr.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: Technical tips & Questions
*****************************************************
#Post#: 95076--------------------------------------------------
Series Side Steps - Fitting Instructions
DIR By: Rob1769
Date: December 14, 2014, 1:30 pm
---------------------------------------------------------
Feeling a bit of a 'dope' today.. planned to fit the Bearmach
Side steps today, opened the boxes but no instructions, thought
right 'cant be that hard' however far too may pieces to just
guess as it :loser:
Have scoured the net this aft to no avail, does anyone have some
that they could scan in and post please or a good photo of
theirs showing where all the bits go :smilewide:
Many thanks in advance
#Post#: 95110--------------------------------------------------
Re: Series Side Steps - Fitting Instructions
DIR By: Rob1769
Date: December 15, 2014, 12:46 pm
---------------------------------------------------------
Reply below from supplier
Hello
Yes the steps come with a number of different brackets because
the steps fit SWB, LWB, front and 2nd row. ( I know That )
Different brackets are used for different models. ( I know That
) You will need to use the bracket which fits your chassis. ( I
know That) The rest can be thrown away. ( I guessed that )
Regards,
Anyone out there with some fitted that can post a decent photo
please so I don't bollox it up ??
Please
#Post#: 95115--------------------------------------------------
Re: Series Side Steps - Fitting Instructions
DIR By: clunk
Date: December 15, 2014, 3:12 pm
---------------------------------------------------------
I fitted one last year,
There are only three fixing points ~ took about 20 minutes
I've nicked this image from ebay
HTML http://i718.photobucket.com/albums/ww185/clunkdave/_12_zps81c91d89.jpg
You can see in the photo two bolt holes in the top of the legs
of the step, ignore them: there are two more bolt holes in the
back of the top of the legs hidden in the photo. Bolts go
through these into the pre-drilled holes in the inner side of
the u channel beneath the floor under the door, the cill ?
Once you have the step hanging loosely from the cill off er up
the brascing bar and bolt it to the cross bar at the back of the
step.
The other end of the bracing bar connects to the chassis with a
rivnut. so once you've worked out where it goes you need to
drill a hole in the chassis use a drill slightly smaller then
the rivnut body so the rivnut is a fit or a light tap with a
hammer to fit in.
For fitting the rivnut without the special tool see
HTML https://www.youtube.com/watch?v=3nN9hv_VUhc
#Post#: 95116--------------------------------------------------
Re: Series Side Steps - Fitting Instructions
DIR By: Rob1769
Date: December 15, 2014, 3:32 pm
---------------------------------------------------------
Cheers Clunk, but that's a 'Boingy Step' ones I have have 4
more bars and 2 more lots of angly brackets :gay:
#Post#: 95117--------------------------------------------------
Re: Series Side Steps - Fitting Instructions
DIR By: Rob1769
Date: December 15, 2014, 3:36 pm
---------------------------------------------------------
This is mine
Loadsa bits !!!!!
[URL=
HTML http://s1325.photobucket.com/user/Landy_Rob/media/Landrover%20General/step_zps42a039ef.jpg.html][IMG]http://i1325.photobucket.com/albums/u627/Landy_Rob/Landrover%20General/step_zps42a039ef.jpg[/img][/URL]
#Post#: 95118--------------------------------------------------
Re: Series Side Steps - Fitting Instructions
DIR By: hippydave
Date: December 15, 2014, 4:09 pm
---------------------------------------------------------
looks more like a rear step to me, the bracing does not look
long enough to reach the side of the chassis.
#Post#: 95119--------------------------------------------------
Re: Series Side Steps - Fitting Instructions
DIR By: Rob1769
Date: December 15, 2014, 4:20 pm
---------------------------------------------------------
Deffo right part number for the side step.... someone must have
one fitted & have a photo !!!!
#Post#: 95122--------------------------------------------------
Re: Series Side Steps - Fitting Instructions
DIR By: espacekiller
Date: December 16, 2014, 3:01 am
---------------------------------------------------------
HTML http://up.picr.de/6121701.jpg
HTML http://up.picr.de/6121700.jpg
HTML http://up.picr.de/6121702.jpg
Hope this helps
#Post#: 95126--------------------------------------------------
Re: Series Side Steps - Fitting Instructions
DIR By: clunk
Date: December 16, 2014, 9:55 am
---------------------------------------------------------
HTML http://i718.photobucket.com/albums/ww185/clunkdave/100_0955_zps494a2481.jpg
#Post#: 95127--------------------------------------------------
Re: Series Side Steps - Fitting Instructions
DIR By: Rob1769
Date: December 16, 2014, 9:58 am
---------------------------------------------------------
>Htlr<
Brilliant, many thanks for all of the above.. should sort from
that info 'this weekends job' :thumbs:
*****************************************************
Page 1 of 1