DIR Return Create A Forum - Home
---------------------------------------------------------
Old Leafsprung Land Rovers
HTML https://ollr.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: Technical tips & Questions
*****************************************************
#Post#: 94007--------------------------------------------------
Oil Cooler Pipe thread size
DIR By: ashcrroft752
Date: October 25, 2014, 5:39 am
---------------------------------------------------------
Any one know what thread the oil cooler pipe unions are for a
200tdi?
I know there are two different sizes for the oil cooler end
which isn't a problem as I have both sets of adaptors.
#Post#: 94061--------------------------------------------------
Re: Oil Cooler Pipe thread size
DIR By: espacekiller
Date: October 26, 2014, 3:54 pm
---------------------------------------------------------
Did you find out any info? I would like to know myself as I am
not happy with the bodge up I have done, give me a shout if you
find out. :thumbs:
#Post#: 94068--------------------------------------------------
Re: Oil Cooler Pipe thread size
DIR By: ashcrroft752
Date: October 27, 2014, 1:45 am
---------------------------------------------------------
It's looking like the filter ends are 1/2inch bsp, oil cooler
end could be 20mm or 1/2inch bsp, think I'll order a cheap
1/2inch and give it a test fit.
#Post#: 94071--------------------------------------------------
Re: Oil Cooler Pipe thread size
DIR By: GlenAnderson
Date: October 27, 2014, 4:58 am
---------------------------------------------------------
There are two types. The early ones are 1/2" BSP, which are easy
to source. The later ones appear to be a Land-Rover only thread
form, which is a ball-ache.
It's not a problem at the rad end, you can swap the male/male
adaptors that screw into it as the rad itself is tapped 1/2"
BSP. If you've a later oil filter mount though, you either need
to use the original L-R hose tails or find a 2.5TD/early 200Tdi
mounting.
#Post#: 94080--------------------------------------------------
Re: Oil Cooler Pipe thread size
DIR By: ashcrroft752
Date: October 27, 2014, 12:15 pm
---------------------------------------------------------
Engine came from a 92 Disco, I've both sets of adaptors for the
cooler so fingers crossed I''ll be 1/2inch.
*****************************************************
Page 1 of 1