URI:
   DIR Return Create A Forum - Home
       ---------------------------------------------------------
       Old Leafsprung Land Rovers
  HTML https://ollr.createaforum.com
       ---------------------------------------------------------
       *****************************************************
   DIR Return to: Technical tips & Questions
       *****************************************************
       #Post#: 91943--------------------------------------------------
       FFS
   DIR By: ferretjuggler
       Date: August 17, 2014, 11:01 am
       ---------------------------------------------------------
       Sunday afternoon and I'd decided to make a start on the brakes.
       Got new seal kits to fit all round.
       Got both rear drums off.
       Shoes OK if a bit low.
       Nothing leaking anywhere.
       One stuck piston freed off with a light tap.
       One bleed nipple stuck fast.
       Managed to persuade the cylinder off then roasted it on the gas
       cooker a while.
       Bleed nipple out.
       Cleaned everything up with 1000 grade wet and dry.
       Feeling quite pleased with myself and ready to put it all back
       together.
       NO FUCKING SEAL GREASE!
       :banghead :banghead :banghead :banghead
       When Girling still made seal kits you used to get a little
       silver sachet of special grease with each set of seals.
       Fuck all here except some paper gaskets that don't fit anything
       :banghead
       Two mile walk to the nearest motor parts shop in the morning.
       If you can still get the stuff.
       Just wondering if there's anything else that will do the job
       without attacking the seal rubber.
       I got some Copperslip but I think it's probably mineral oil
       based.
       #Post#: 91967--------------------------------------------------
       Re: FFS
   DIR By: clunk
       Date: August 17, 2014, 2:43 pm
       ---------------------------------------------------------
       Red Rubber  Grease  still available, but not in Halfords
       :2mo5pow:
       #Post#: 91984--------------------------------------------------
       Re: FFS
   DIR By: james_r_lucas
       Date: August 18, 2014, 2:35 am
       ---------------------------------------------------------
       I had to get mine online, none of the motor factors knew what
       the stuff was!!!
       #Post#: 91990--------------------------------------------------
       Re: FFS
   DIR By: ferretjuggler
       Date: August 18, 2014, 5:18 am
       ---------------------------------------------------------
       Found a little plastic tub of white rubber grease.
       At least that's what it was sold to me as about five years ago.
       Only about 5g and going hard.
       Managed to warm it up until it softened a bit.
       Just about enough to smear the piston skirts with.
       Any chance you can remember where you bought the red stuff
       online?
       When I change the shoes I can get a small syringe,  pull back
       the dust seals and put the proper stuff in there.
       Cheers!
       #Post#: 91991--------------------------------------------------
       Re: FFS
   DIR By: kev
       Date: August 18, 2014, 5:31 am
       ---------------------------------------------------------
       Theres shitloads of the stuff on ebay, around three quid for a
       little pot.
       #Post#: 91993--------------------------------------------------
       Re: FFS
   DIR By: ferretjuggler
       Date: August 18, 2014, 7:37 am
       ---------------------------------------------------------
       Found some and grabbed it.
       £7 for 100g with the P&P
       Should last for a while now.
       #Post#: 92014--------------------------------------------------
       Re: FFS
   DIR By: nickjaxe
       Date: August 18, 2014, 4:06 pm
       ---------------------------------------------------------
       Would silicon grease do the job????
       *****************************************************
       Page 1 of 1