DIR Return Create A Forum - Home
---------------------------------------------------------
Old Leafsprung Land Rovers
HTML https://ollr.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: General Land Rover Stuff
*****************************************************
#Post#: 91015--------------------------------------------------
adventures in the Twat-o-sphere #97
DIR By: clunk
Date: July 20, 2014, 11:20 am
---------------------------------------------------------
When re-fitting the brake back plate to your hubs ensure the
locking tabs are the correct way round
Otherwise
HTML http://i718.photobucket.com/albums/ww185/clunkdave/ollr/IMG_0397_zpse57dd7f6.jpg
the hub rides on the tab leaving a gap of about 1.5mm
HTML http://i718.photobucket.com/albums/ww185/clunkdave/ollr/IMG_0400_zps536514a0.jpg
which moves the seal just sufficient to allow the EP90 to seep
through and piss on your newish mintex.
HTML http://i718.photobucket.com/albums/ww185/clunkdave/IMG_0398_zps64f36311.jpg
three out of four done right and it getting dark and I was
tired :haha:
luckily it was just a test drive up and down the road, and I've
probably caught cancer from the acetone I used to de-oil the
linings but the old thing does tend to stop when the brake is
applied now !
#Post#: 91016--------------------------------------------------
Re: adventures in the Twat-o-sphere #97
DIR By: hippydave
Date: July 20, 2014, 11:23 am
---------------------------------------------------------
im pretty sure i did mine right but im now going to check just
in case
#Post#: 91019--------------------------------------------------
Re: adventures in the Twat-o-sphere #97
DIR By: ashcrroft752
Date: July 20, 2014, 12:36 pm
---------------------------------------------------------
And thus the dark shadow of paranoia did consume the subjects of
OLLRshire
#Post#: 91021--------------------------------------------------
Re: adventures in the Twat-o-sphere #97
DIR By: smackitwithanammer
Date: July 20, 2014, 1:34 pm
---------------------------------------------------------
And make sure they're well knocked over. Just been round
checking mine after a long time standing and one backplate had
become loose :o
#Post#: 91051--------------------------------------------------
Re: adventures in the Twat-o-sphere #97
DIR By: Peter de Dawg
Date: July 21, 2014, 1:24 pm
---------------------------------------------------------
Good post ! Fkg about with back plates today meself !
#Post#: 91419--------------------------------------------------
Re: adventures in the Twat-o-sphere #97
DIR By: Richard
Date: August 2, 2014, 11:23 am
---------------------------------------------------------
O.M.G. just rebuilt my axles don.t recall any locking tabs
fitted? kind regards
yup as I thought none whatsoever pse advise is this not belt and
braces perhaps? :banghead
#Post#: 91424--------------------------------------------------
Re: adventures in the Twat-o-sphere #97
DIR By: clunk
Date: August 2, 2014, 2:12 pm
---------------------------------------------------------
I don't think the wheel will fall off, but behind those bolts is
half a litre of EP90. so it just needs one to slack off a tad
due to vibration and Voilą! a distinct lack of stoppedness.
HTML http://i718.photobucket.com/albums/ww185/clunkdave/ollr/IMG_0398_zps64f36311.jpg.<br
/>
*****************************************************
Page 1 of 1