DIR Return Create A Forum - Home
       ---------------------------------------------------------
       Old Leafsprung Land Rovers
  HTML https://ollr.createaforum.com
       ---------------------------------------------------------
       *****************************************************
   DIR Return to: Technical tips & Questions
       *****************************************************
       #Post#: 85017--------------------------------------------------
       Re: banter and folly in the 2.25 diesel world
   DIR By: DaveSIIA
       Date: February 9, 2014, 12:18 pm
       ---------------------------------------------------------
       --- Quote from: Wooden link ---
       >
       > 2.25TD - I like this idea.
       >
       > Can you give more details on your conversion DaveSIIA..?
       >
       --- End Quote ---
       I bought secondhand a kit by TB Turbos of Lancaster. They did a
       variety of after-market turbo conversions in the early 90's and
       this one was for a 2.5NAD.
       The kit comprised a manifold, remote waste gate, Holset H1
       turbo, downpipe and oil feed / return lines. Fitting was
       literally nuts & bolts, except for having to make a hole in the
       side of the sump (below oil level) for the oil return/drain from
       the turbo. Oil feed is from a tee piece that screws in to the
       filter housing where the oil pressure switch is, the pressure
       switch screws in to one of the legs of the tee. The exhaust
       downpipe was for a 90 so a little bit of creative welding
       adapted it to the IIA system.
       *****************************************************
       Page 2 of 2
   DIR Previous Page