URI:
   DIR Return Create A Forum - Home
       ---------------------------------------------------------
       Old Leafsprung Land Rovers
  HTML https://ollr.createaforum.com
       ---------------------------------------------------------
       *****************************************************
   DIR Return to: Technical tips & Questions
       *****************************************************
       #Post#: 82643--------------------------------------------------
       Headlight alignment
   DIR By: Donk
       Date: December 21, 2013, 2:33 am
       ---------------------------------------------------------
       Hello,  seeking advice on headlight alignment for sIII with
       halogen light conversion.
       Are there any measurement specs available on the headlight
       adjustments?
       #Post#: 82644--------------------------------------------------
       Re: Headlight alignment
   DIR By: hippydave
       Date: December 21, 2013, 2:41 am
       ---------------------------------------------------------
       i adjusted mine by shining them against the wall and looking at
       the beam pattern and adjusting them that way, they didnt need
       tinkering with on the MOT :smilewide:
       #Post#: 82648--------------------------------------------------
       Re: Headlight alignment
   DIR By: chippers
       Date: December 21, 2013, 3:51 am
       ---------------------------------------------------------
       Just done mine, and found this helpful, bearing in mind this is
       for a RHD vehicle, so the raised area of the beam (apparently to
       illuminate road signs on dip without dazzling oncoming vehicles)
       should go up to the left, not the right as in the pdf.
  HTML http://www.coolbulbs.com/HID-VISUAL-HEADLIGHT-AIMING-PROCEDURE.pdf
  HTML http://www.coolbulbs.com/HID-VISUAL-HEADLIGHT-AIMING-PROCEDURE.pdf
       having said that, I adjusted them using this system first, and
       then tweaked a couple of times until they "seemed OK" Not had
       them properly tested/checked to MOT Standards though. Used a
       wall in a nearby industrial estate and took along some masking
       tape instead of marking walls. Left engine running too as
       battery is a bit tired!
       #Post#: 82652--------------------------------------------------
       Re: Headlight alignment
   DIR By: guest13
       Date: December 21, 2013, 4:16 am
       ---------------------------------------------------------
       The owners handbook has all the measurements for setting them
       *****************************************************
       Page 1 of 1