DIR Return Create A Forum - Home
---------------------------------------------------------
Old Leafsprung Land Rovers
HTML https://ollr.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: Technical tips & Questions
*****************************************************
#Post#: 79752--------------------------------------------------
shuttle valve
DIR By: hippydave
Date: November 15, 2013, 11:50 am
---------------------------------------------------------
Can anyone please tell me the size of the tread on the front
bottom of a shuttle valve, i have tried all the fittings i have
and they just drop out, the ones at the back are m10 but i cant
get any to fit the one on the bottom that will take 3/16" pipe i
have the original pipes from the servo and the line is thicker
than 3/16 as i tried a union i got off one of them it goes in
the thread but my new pipe is smaller.
Cheers Dave.
#Post#: 79756--------------------------------------------------
Re: shuttle valve
DIR By: Roveerman
Date: November 15, 2013, 1:06 pm
---------------------------------------------------------
Ether take the old fittings or the unit to your local hydralic
specialist and I'm sure they will have something to fit.
#Post#: 79757--------------------------------------------------
Re: shuttle valve
DIR By: hippydave
Date: November 15, 2013, 1:08 pm
---------------------------------------------------------
i have taken the valve off so that is a plan
#Post#: 79763--------------------------------------------------
Re: shuttle valve
DIR By: kev
Date: November 15, 2013, 2:13 pm
---------------------------------------------------------
--- Quote from: hippydave link ---
>
> front bottom
>
--- End Quote ---
Farrr...
#Post#: 79764--------------------------------------------------
Re: shuttle valve
DIR By: stevemac78
Date: November 15, 2013, 2:15 pm
---------------------------------------------------------
Ha ha what he said! ^ rofl
#Post#: 79765--------------------------------------------------
Re: shuttle valve
DIR By: hippydave
Date: November 15, 2013, 2:19 pm
---------------------------------------------------------
Kev it could only have been you to find that.
#Post#: 79767--------------------------------------------------
Re: shuttle valve
DIR By: one and two
Date: November 15, 2013, 2:47 pm
---------------------------------------------------------
If the other threads are definately metric (ie it has come off a
110 or late series 3) then you need m12x1 for 3/16 pipe male
union.
If it is imperial you need 7/16 unf for 3/16 pipe male union.
#Post#: 79773--------------------------------------------------
Re: shuttle valve
DIR By: kev
Date: November 15, 2013, 3:29 pm
---------------------------------------------------------
I actually meant to type 'fnarrr'... :banghead
#Post#: 79780--------------------------------------------------
Re: shuttle valve
DIR By: Albert Ross
Date: November 15, 2013, 6:31 pm
---------------------------------------------------------
I have a chassis mounted one here (Believed to be metric) and
still has a few bits of pipe in it... I can take a look upon my
return from work Saturday. It's a 109 item, and has been in the
elements. I shall try to report back before dark.
#Post#: 79809--------------------------------------------------
Re: shuttle valve
DIR By: hippydave
Date: November 16, 2013, 7:53 am
---------------------------------------------------------
Cheers Jim much appreciated i got some m12x1 today and they are
too big its staring to piss me off now, ive taken it off now so
i can take the bloody thing and try unions in it but no where is
now open.
*****************************************************
Page 1 of 2
DIR Next Page