URI:
   DIR Return Create A Forum - Home
       ---------------------------------------------------------
       Old Leafsprung Land Rovers
  HTML https://ollr.createaforum.com
       ---------------------------------------------------------
       *****************************************************
   DIR Return to: Technical tips & Questions
       *****************************************************
       #Post#: 72395--------------------------------------------------
       Running out of go.
   DIR By: 0jonny0
       Date: August 28, 2013, 3:36 am
       ---------------------------------------------------------
       Good morning,
       My 2.25 diesel this morning seems to be dieing.
       Can anybody help with possible causes? The symptoms are;
       It gently seemed to be under powered, it kept on going but felt
       like I only was pressing half way of the accelerator.
       Slight smell of oil,
       Stalls when not being accelerated.
       A bit noisy.
       So its like it only runs at 75%
       What could this be? Head gasket? valve seals?
       How do i problem solve this? is it head off job/ rebuild?
       Bit of a long shot but thanks anyway.
       #Post#: 72400--------------------------------------------------
       Re: Running out of go.
   DIR By: puddlejumper
       Date: August 28, 2013, 4:19 am
       ---------------------------------------------------------
       How long since it was serviced ie diesel filter, air filter etc?
       #Post#: 72403--------------------------------------------------
       Re: Running out of go.
   DIR By: Albert Ross
       Date: August 28, 2013, 4:30 am
       ---------------------------------------------------------
       What colour is/was the exhaust smoke when this happens? Black =
       insufficient air/overfuelling. White = unburnt fuel/late
       injection. Blue = oil. Grey =  normal. All of the above =
       fucked. I have seen the air filter hoses collapse under suction,
       restricting air flow... take it off and try again. Fuel filter
       clogged.. sometimes caused by water in the fuel.. Have you been
       running biodiesel? 2286 do NOT like anything other than pump
       fuel. Some people say it's alright, I drive one daily and it
       hates fuel that isn't a premium type. Possibly and air leak into
       the fuel system? Are all pipes/hoses tight? Any suspect
       connection needs to be sealed correctly. Any fuel leaks off the
       pump? Any dripping out means air is also getting in. Try again
       and report back please!
       #Post#: 72412--------------------------------------------------
       Re: Running out of go.
   DIR By: 0jonny0
       Date: August 28, 2013, 4:59 am
       ---------------------------------------------------------
       I serviced it 4 months ago. Been using it as my daily driver so
       it has had some pain. Just  been off roading in it round Malham
       at the weekend and it didn't miss a beat.
       It has been black smoky on start up a big cloud of smoke and
       when flat out you can see black smoke coming out. But its been
       like that for ages so I just kept on going.
       Thanks for your reply I will have ago on it after work and look
       through what you have suggested.
       #Post#: 72414--------------------------------------------------
       Re: Running out of go.
   DIR By: 474
       Date: August 28, 2013, 5:01 am
       ---------------------------------------------------------
       Check your accelerator linkage and stop cable before you start
       undoing big oily bits. Could be a five minute job.
       (PS they always sound noisier and smell smellier when you think
       they're fucked.)
       #Post#: 72432--------------------------------------------------
       Re: Running out of go.
   DIR By: NiteMare
       Date: August 28, 2013, 6:10 am
       ---------------------------------------------------------
       a couple of times mine has lost power and speed in the past, it
       was a simple fix
       the loud pedal in the cab had come loose on the shaft and needed
       repositioning and tightening properly
       this gave me full travel again at both the pedal and injector
       pump, so wedge the pedal down and check the pump lever has gone
       right to the stop before getting too involved
       #Post#: 72553--------------------------------------------------
       Re: Running out of go.
   DIR By: 0jonny0
       Date: August 29, 2013, 3:00 am
       ---------------------------------------------------------
       I had a look over the Landy after work and soon found one
       problem.
       Good news its still alive, bad news I may have knocked 100 years
       off the engines life.
       Due to;
       No Oil!! It drank 6 pints and has improved engine noise
       (surprisingly!!) and is back nearly to where we were.
       There is now more engine noise, it seems to be very tappie on
       overrun/engine braking.
       The oil must be getting burnt off, I see alot of smoke on start
       up must be that.
       Thanks for your advice, at least shes still going for now.
       #Post#: 72560--------------------------------------------------
       Re: Running out of go.
   DIR By: Albert Ross
       Date: August 29, 2013, 4:12 am
       ---------------------------------------------------------
       Failure imminent. The tapping is likely your chain tensioner and
       or other things. Get a spare engine ready.
       #Post#: 72636--------------------------------------------------
       Re: Running out of go.
   DIR By: 474
       Date: August 29, 2013, 12:57 pm
       ---------------------------------------------------------
       Bugger. Whereabouts are you?
       #Post#: 72639--------------------------------------------------
       Re: Running out of go.
   DIR By: Albert Ross
       Date: August 29, 2013, 1:11 pm
       ---------------------------------------------------------
       South Yorkshire. I only have partial usable engines here... I
       have three new arrivals need inspection, so that's a month away
       before I start, at least. The current crop is half split and
       none are particularly usable. Do you have a 3 or a 5 bearing
       unit in there?
       *****************************************************
       Page 1 of 2
   DIR Next Page