URI:
   DIR Return Create A Forum - Home
       ---------------------------------------------------------
       Old Leafsprung Land Rovers
  HTML https://ollr.createaforum.com
       ---------------------------------------------------------
       *****************************************************
   DIR Return to: Technical tips & Questions
       *****************************************************
       #Post#: 71985--------------------------------------------------
       electrical gremlins
   DIR By: blenky
       Date: August 24, 2013, 4:50 am
       ---------------------------------------------------------
       Lost my lights and wipers and its blowing fuses. Ive checked the
       switchs,feed live and earth and they seam fine so f**k knows.
       #Post#: 71988--------------------------------------------------
       Re: electrical gremlins
   DIR By: niteram
       Date: August 24, 2013, 5:48 am
       ---------------------------------------------------------
       usually live wire shorting to earth between switchs and lights
       or wipers, most probably where cable passes through a panel or
       where cable clipped to panel. so that when you turn switch on
       the live feed goes straight to earth and blows fuse.
       #Post#: 72012--------------------------------------------------
       Re: electrical gremlins
   DIR By: blenky
       Date: August 24, 2013, 1:59 pm
       ---------------------------------------------------------
       Right thanks i will check that. It sound like it could be that
       as its been intermittent today as ive been trying to sort it.
       Thanks.
       #Post#: 72035--------------------------------------------------
       Re: electrical gremlins
   DIR By: espacekiller
       Date: August 24, 2013, 6:36 pm
       ---------------------------------------------------------
       I would
       Disconnect the battery, connect a meter between earth and the
       live terminal on the fuse that keeps blowing (the side going
       towards the lights etc).
       Switch the meter to test for continuity (beep) if it has it or
       resistance.
       Systematically work your way around the loom gently wiggling the
       wires, if you find the problem the meter will detect it without
       blowing a fuse every time, you should be able to narrow it down.
       It could also be a faulty wiper motor or similar so try the
       switches of the various  items and check resistance for a proper
       dead short, hope this helps.
       *****************************************************
       Page 1 of 1