URI:
   DIR Return Create A Forum - Home
       ---------------------------------------------------------
       Old Leafsprung Land Rovers
  HTML https://ollr.createaforum.com
       ---------------------------------------------------------
       *****************************************************
   DIR Return to: Technical tips & Questions
       *****************************************************
       #Post#: 66501--------------------------------------------------
       Parabolic springs too short?
   DIR By: Baldy 1
       Date: June 30, 2013, 9:53 am
       ---------------------------------------------------------
       I bought a set of parabolic springs as part of a job lot off
       fleabay. I was told they were off a SWB 88 which was handy
       because thats what mine is.
       So after weeks and weeks of chassis prep today was the day for
       the springs to be fitted. These are like new with very little
       use.
       I fitted them to the rear shackles first and there was no way
       they would meet the front spring hanger. I took them off and
       fitted the front first, put the shackles forward and they fit
       but the shock absorber(Which was part of the same deal) would
       not extend enough to reach the mounting points.
       Do they need shackles on each end of the spring or is it another
       seller that has seen me coming and thought "MUG"
       The rear shackles are now pointing towards the front of the
       chassis as opposed to the rear.
       HELP *help* *help* *help* *help* *help* *help* *help* *help*
       *help* *help* *help* *help* *help* *help* *help* *help* *help*
       *help* *help* *help* *help*
       #Post#: 66506--------------------------------------------------
       Re: Parabolic springs too short?
   DIR By: smackitwithanammer
       Date: June 30, 2013, 10:05 am
       ---------------------------------------------------------
       Sounds like they're fronts ones and you're putting them on the
       back. The back ones are a fair bit longer
       #Post#: 66508--------------------------------------------------
       Re: Parabolic springs too short?
   DIR By: Baldy 1
       Date: June 30, 2013, 10:33 am
       ---------------------------------------------------------
       These are the longest. I havnt tried to fit the front ones yet
       as i am still trying to find my knuckle that disapeared after
       the chassis dropped on mi hand!!
       #Post#: 66511--------------------------------------------------
       Re: Parabolic springs too short?
   DIR By: Bert the Bodger
       Date: June 30, 2013, 10:43 am
       ---------------------------------------------------------
       Rocky Mountain parabolics come (or used to come) with an
       instruction to 'pre load the springs with the weight of three
       men' before tightening eye bolts and shackles. Shackles at both
       ends is, frankly, a charmingly alarming idea! If your springs
       are Britpart you should cut your losses now and weigh them
       in-they are scrap.
       Richard
       #Post#: 66515--------------------------------------------------
       Re: Parabolic springs too short?
   DIR By: Lurch
       Date: June 30, 2013, 11:08 am
       ---------------------------------------------------------
       What do they measure hole to hole in a staight line?
       #Post#: 66523--------------------------------------------------
       Re: Parabolic springs too short?
   DIR By: Baldy 1
       Date: June 30, 2013, 11:39 am
       ---------------------------------------------------------
       Not sure, I will measure them tomorrow. Like I said I bought
       these as a job lot and everything else is SWB le gear so I must
       be doing seething wrong?????
       #Post#: 66526--------------------------------------------------
       Re: Parabolic springs too short?
   DIR By: Baldy 1
       Date: June 30, 2013, 11:46 am
       ---------------------------------------------------------
       Just measured them. They are 44 and a half inches hole centre to
       hole centre. This is fitted to the chassis.
       #Post#: 66604--------------------------------------------------
       Re: Parabolic springs too short?
   DIR By: mick swb
       Date: July 1, 2013, 10:11 am
       ---------------------------------------------------------
       Both of mine are stood in the back street if you need to run
       your tape over them. Both fitted with paras.
       #Post#: 66608--------------------------------------------------
       Re: Parabolic springs too short?
   DIR By: Baldy 1
       Date: July 1, 2013, 10:18 am
       ---------------------------------------------------------
       Trying to upload photos of the shackle / Spring.
       but while you are on Mick, do you have a seat box and rear floor
       or decent rear tub?
       #Post#: 66610--------------------------------------------------
       Re: Parabolic springs too short?
   DIR By: Baldy 1
       Date: July 1, 2013, 10:28 am
       ---------------------------------------------------------
       [URL=
  HTML http://s1345.photobucket.com/user/Chrisbaldmiesterwalker/media/image_zps11be3f91.jpg.html][IMG]http://i1345.photobucket.com/albums/p678/Chrisbaldmiesterwalker/image_zps11be3f91.jpg[/img][/URL]
       [URL=
  HTML http://s1345.photobucket.com/user/Chrisbaldmiesterwalker/media/image_zps11be3f91.jpg.html][IMG]http://i1345.photobucket.com/albums/p678/Chrisbaldmiesterwalker/image_zps11be3f91.jpg[/img][/URL]
       [URL=
  HTML http://s1345.photobucket.com/user/Chrisbaldmiesterwalker/media/image_zps11be3f91.jpg.html][IMG]http://i1345.photobucket.com/albums/p678/Chrisbaldmiesterwalker/image_zps11be3f91.jpg[/img][/URL][URL=http://s1345.photobucket.com/user/Chrisbaldmiesterwalker/media/image_zps11be3f91.jpg.html][IMG]http://i1345.photobucket.com/albums/p678/Chrisbaldmiesterwalker/image_zps11be3f91.jpg[/img][/URL]
       *****************************************************
       Page 1 of 3
   DIR Next Page