DIR Return Create A Forum - Home
---------------------------------------------------------
Old Leafsprung Land Rovers
HTML https://ollr.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: Technical tips & Questions
*****************************************************
#Post#: 4676--------------------------------------------------
Series one Bulkheads/repair panels
DIR By: Moogling
Date: January 15, 2012, 11:00 am
---------------------------------------------------------
Hi all.
I'm looking at a series 1 truck cab.
Apparently the bulkhead is well gone.
So i could do with a repalcement, or some proper repair panels..
has anyone got any ideas where a repair panel could be found, or
how much I should expect to pay for a replacement?
Thanks!
Matt
#Post#: 4680--------------------------------------------------
Re: Series one Bulkheads/repair panels
DIR By: feelinperky
Date: January 15, 2012, 11:03 am
---------------------------------------------------------
Radford do bulkhead but your looking at silly prices. you could
probably get yours repaired for cheaper maybe.... ???
#Post#: 4682--------------------------------------------------
Re: Series one Bulkheads/repair panels
DIR By: Moogling
Date: January 15, 2012, 11:13 am
---------------------------------------------------------
Thanks! A last resort then, they'll be!
I can weld, are there any sections on a S1 bulkhead that are
hard to reproduce? (like around the vents on a s2)
#Post#: 4684--------------------------------------------------
Re: Series one Bulkheads/repair panels
DIR By: Moogling
Date: January 15, 2012, 11:13 am
---------------------------------------------------------
Just realised the pics are terrible!
(edit) can't seem to put pics up now!
#Post#: 4750--------------------------------------------------
Re: Series one Bulkheads/repair panels
DIR By: Swops
Date: January 15, 2012, 1:42 pm
---------------------------------------------------------
Radfords also to repair sections , top rails , foot wells and
door posts
#Post#: 4783--------------------------------------------------
Re: Series one Bulkheads/repair panels
DIR By: FenTiger
Date: January 15, 2012, 2:35 pm
---------------------------------------------------------
Top rail and some bits can be got from Craddocks. Top rail is
hardest bit to fabricate. The rest of the bulkhead parts can be
fairly easily made.
*****************************************************
Page 1 of 1