URI:
   DIR Return Create A Forum - Home
       ---------------------------------------------------------
       Old Leafsprung Land Rovers
  HTML https://ollr.createaforum.com
       ---------------------------------------------------------
       *****************************************************
   DIR Return to: Technical tips & Questions
       *****************************************************
       #Post#: 60362--------------------------------------------------
       Please take mercy.....
   DIR By: Flatcap
       Date: May 9, 2013, 5:02 pm
       ---------------------------------------------------------
       But this is about tyre pressures :smilewide:
       88" S3 with 235 85's AT's on weller wheels with tdi up front.
       Standard springs on front & para's on the rear(yes I know its
       not ideal)
       What are the thoughts on tyre pressures as 30psi feel damn
       bouncy which has been my starting point!
       #Post#: 60364--------------------------------------------------
       Re: Please take mercy.....
   DIR By: guest13
       Date: May 9, 2013, 5:07 pm
       ---------------------------------------------------------
       I wouldn't have thought that was a bad starting point
       Easiest is to look at the contact pattern on the tyre ... Outer
       edges to soft, middle to high
       Wet the road in front of the tyres and roll forward ... You will
       see the contact pattern on the tyre/road
       #Post#: 60383--------------------------------------------------
       Re: Please take mercy.....
   DIR By: bubble
       Date: May 10, 2013, 3:46 am
       ---------------------------------------------------------
       Same size tyre on mine and I run 28 psi all round..
       #Post#: 60463--------------------------------------------------
       Re: Please take mercy.....
   DIR By: divie
       Date: May 11, 2013, 1:39 am
       ---------------------------------------------------------
       I am with Bubble on 28 psi all round.
       #Post#: 60485--------------------------------------------------
       Re: Please take mercy.....
   DIR By: Albert Ross
       Date: May 11, 2013, 6:46 am
       ---------------------------------------------------------
       I run 40 and 50psi on my laden 109. Feels right with 3/4 of a
       ton on board....
       #Post#: 60488--------------------------------------------------
       Re: Please take mercy.....
   DIR By: LeftHandFred
       Date: May 11, 2013, 7:23 am
       ---------------------------------------------------------
       We run anything from 30psi upwards on ours.  Of course one of
       the front shockers is U/S so that corner bounces no matter the
       tyre pressure!  ;D
       #Post#: 60508--------------------------------------------------
       Re: Please take mercy.....
   DIR By: Gadget
       Date: May 11, 2013, 10:27 am
       ---------------------------------------------------------
       Running 25psi  in front (750/16) and 30psi  in rear (235/85-16)
       feels ok.
       #Post#: 60523--------------------------------------------------
       Re: Please take mercy.....
   DIR By: harryhedgehog
       Date: May 11, 2013, 12:50 pm
       ---------------------------------------------------------
       Around 28psi here too
       HHH
       #Post#: 60631--------------------------------------------------
       Re: Please take mercy.....
   DIR By: Flatcap
       Date: May 12, 2013, 2:06 pm
       ---------------------------------------------------------
       Cheers lads, looking at all the recommendations, I dropped them
       all around (unladen) to 27 psi and did a weekend of laning on
       that ;D Felt a bit more secure on the tarmac than at 30psi but
       that could have been my imagination :smilewide:
       *****************************************************
       Page 1 of 1