DIR Return Create A Forum - Home
---------------------------------------------------------
Old Leafsprung Land Rovers
HTML https://ollr.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: General Land Rover Stuff
*****************************************************
#Post#: 59305--------------------------------------------------
Throttle Linkages.
DIR By: Rory
Date: April 29, 2013, 11:45 pm
---------------------------------------------------------
Can anybody please advise me as to where I can buy the ball and
socket type linkages found on Series Ones and 2's.
Thank you.
#Post#: 59313--------------------------------------------------
Re: Throttle Linkages.
DIR By: andyb
Date: April 30, 2013, 2:07 am
---------------------------------------------------------
HTML http://www.rod-ends.co.uk/
HTML http://www.rod-ends.co.uk/
:)
#Post#: 59326--------------------------------------------------
Re: Throttle Linkages.
DIR By: Rory
Date: April 30, 2013, 5:34 am
---------------------------------------------------------
Thanks Andy, and welcome, but that is not what I am after.
#Post#: 59332--------------------------------------------------
Re: Throttle Linkages.
DIR By: mr.scruff
Date: April 30, 2013, 6:24 am
---------------------------------------------------------
I got some NOS Rover ones in boxes marked 1956 but I can't
remember if they were from Craddocks or LR Series. Either way
they are out there! :thumbs:
#Post#: 59335--------------------------------------------------
Re: Throttle Linkages.
DIR By: strang
Date: April 30, 2013, 6:46 am
---------------------------------------------------------
I bought a new one from Huddersfield Land Rover Centre - came in
a genuine parts bag too! The ends look different, so if you are
looking for originality, then its not for the rivet counter.
Is your current linkage loose and dropping off maybe? mine used
to, so I just inverted it, and it never fell off again - the
wear points were no longer holding it on. Worth a try maybe?
*****************************************************
Page 1 of 1