URI:
   DIR Return Create A Forum - Home
       ---------------------------------------------------------
       Old Leafsprung Land Rovers
  HTML https://ollr.createaforum.com
       ---------------------------------------------------------
       *****************************************************
   DIR Return to: Technical tips & Questions
       *****************************************************
       #Post#: 57803--------------------------------------------------
       Rear Hub seal on S3?
   DIR By: bill773mini
       Date: April 19, 2013, 8:44 am
       ---------------------------------------------------------
       Hello,
       I'm new on here and have a question. I have a 109 S3 and an
       issue with the rear hub leaking oil. Is this the hub seal failed
       and if so how urgent is it to fix? Will a couple of weeks (or
       approx 50 miles) do or is it an urgent job?
  HTML http://i194.photobucket.com/albums/z229/bill773mini/IMG_3021_zps907b3abb.jpg
       Thanks
       Bill
       #Post#: 57804--------------------------------------------------
       Re: Rear Hub seal on S3?
   DIR By: hippydave
       Date: April 19, 2013, 9:29 am
       ---------------------------------------------------------
       better to do sooner rather than later as the oil will be all
       over the drum and shoes not just the outside, it dosnt take long
       and saves wasting oil aswell.
       #Post#: 57806--------------------------------------------------
       Re: Rear Hub seal on S3?
   DIR By: ajb403
       Date: April 19, 2013, 9:32 am
       ---------------------------------------------------------
       First thing I'd check would be the axle breather to make sure
       it's not blocked (unscrew it and give it a shake, you should be
       able to hear the ball bearing, if not wash it in a solvent of
       your choice), if it is blocked then when the diff warms the
       increase in internal pressure can blow the oil past the seal.
       Mine weeps very very slowly, nowhere near as bad as yours, maybe
       a teaspoon of oil gets out every 4-6 months but the hub cap
       traps it.  As a temporary fix you could try pulling off the hub
       cap (it may be filled with oil so be prepared to catch it!),
       cleaning it up and then run a bead of hylomar instant gasket
       stuff round the edge when you refit it.  If you have blown a
       seal there I'd also check inside the brake drum just to make
       sure you're not leaking onto the brake shoes too.
       #Post#: 57807--------------------------------------------------
       Re: Rear Hub seal on S3?
   DIR By: bill773mini
       Date: April 19, 2013, 9:57 am
       ---------------------------------------------------------
       Thank you very much for the fast replies. Great advice too, it
       only really happens on longer runs (20 - 25 miles) too so the
       blocked breather could well be the culprit. Thanks guys I'll get
       on it at the weekend.
       Bill
       #Post#: 57809--------------------------------------------------
       Re: Rear Hub seal on S3?
   DIR By: 0jonny0
       Date: April 19, 2013, 10:28 am
       ---------------------------------------------------------
       Its an easy job and the parts are cheap, get it done as soon as
       you can, bearings and diffs are alot more coin and hassle.
       #Post#: 57810--------------------------------------------------
       Re: Rear Hub seal on S3?
   DIR By: Lucy
       Date: April 19, 2013, 10:44 am
       ---------------------------------------------------------
       First thing I'd do is to tighten up the drive flange bolts and
       see if it stops leaking
       #Post#: 57812--------------------------------------------------
       Re: Rear Hub seal on S3?
   DIR By: Doug_T
       Date: April 19, 2013, 10:50 am
       ---------------------------------------------------------
       --- Quote from: Lucy link ---
       >
       > First thing I'd do is to tighten up the drive flange bolts and
       see if it stops leaking
       >
       --- End Quote ---
       ^^^This. Also if that's a very late SIII with the plastic hub
       caps like the boingy ones I'd check to see if it hasn't perished
       and cracked.
       #Post#: 57902--------------------------------------------------
       Re: Rear Hub seal on S3?
   DIR By: bill773mini
       Date: April 20, 2013, 2:04 am
       ---------------------------------------------------------
       Thanks again for all the advice. Sadly I have no idea on its
       actual age as it was on a 2A V5 when I got it. Is there a way to
       date it without a vin?
       #Post#: 57903--------------------------------------------------
       Re: Rear Hub seal on S3?
   DIR By: parksy64
       Date: April 20, 2013, 2:06 am
       ---------------------------------------------------------
       It's definately a plastic cap on the hub- so check that first.
       For dating, decent photos of the inside and out will help us
       give a pretty good stab at the date.
       #Post#: 57907--------------------------------------------------
       Re: Rear Hub seal on S3?
   DIR By: bill773mini
       Date: April 20, 2013, 2:56 am
       ---------------------------------------------------------
       Thanks, I'll get some photos up.
       *****************************************************
       Page 1 of 3
   DIR Next Page