URI:
   DIR Return Create A Forum - Home
       ---------------------------------------------------------
       Old Leafsprung Land Rovers
  HTML https://ollr.createaforum.com
       ---------------------------------------------------------
       *****************************************************
   DIR Return to: Technical tips & Questions
       *****************************************************
       #Post#: 57441--------------------------------------------------
       Help getting it started??
   DIR By: Tight fart
       Date: April 15, 2013, 2:53 pm
       ---------------------------------------------------------
       Ok I'm trying to get my S2 started, it's been a while since I
       played with a points setup petrol car!!
       The old grey cells are getting a bit tired and forgetful..
       2 thing are obviously wrong
       1, no spark, although I have power at the coil?
       2, not a problem yet as I'm gravity feeding the carb but the
       electric fuel pump seems dead?
       A splutter with some easy start would be a step in the right
       direction.
       #Post#: 57442--------------------------------------------------
       Re: Help getting it started??
   DIR By: AlexB
       Date: April 15, 2013, 2:56 pm
       ---------------------------------------------------------
       serves you right for buying a petrol - thats what the bastards
       are like.
       Screw driver opening and closing points when ig is on - should
       spark.
       If not praps coil is knacked
       #Post#: 57463--------------------------------------------------
       Re: Help getting it started??
   DIR By: parksy64
       Date: April 15, 2013, 3:37 pm
       ---------------------------------------------------------
       Fuel pump might just need a "tap" with something blunt to remind
       it to move :rolleye0012:
       As for the ignition as Alex says, coil- to disi, check the
       leads, then lever the points open should be a spark. if yes
       there, reset the gap, cap back on, take each plug out, reset the
       gaps while you are there, check for sparks there.  If nothing I
       would check the condenser.
       Also worth trying at night with the lights of as you can see
       where the spark is leaking (ie old cables/ crack disi cap)!
       Then junk it and get a lecy disi! :executioner:
       #Post#: 57517--------------------------------------------------
       Re: Help getting it started??
   DIR By: Tight fart
       Date: April 16, 2013, 4:26 am
       ---------------------------------------------------------
       Thanks it runs!!
       A bit of emery cloth between the points and fire straight away,
       Just need to sort fuel pump now.
       *****************************************************
       Page 1 of 1