DIR Return Create A Forum - Home
       ---------------------------------------------------------
       Old Leafsprung Land Rovers
  HTML https://ollr.createaforum.com
       ---------------------------------------------------------
       *****************************************************
   DIR Return to: Technical tips & Questions
       *****************************************************
       #Post#: 55922--------------------------------------------------
       stuck in low ratio
   DIR By: moakley
       Date: April 1, 2013, 3:10 am
       ---------------------------------------------------------
       Hi
       Stuck in low ratio, the red lever wont go forward, (unless I
       press the yellow down...but then I'm still in 4WD !)
       Taken floor out from various posts, can see front of transfer
       box, but really need some detailed words of wisdom as to what to
       do next...or a photo .
       Searched forum...sure this is alreday here somewhere but damned
       if I can find.
       All help appreciated.
       #Post#: 55929--------------------------------------------------
       Re: stuck in low ratio
   DIR By: Lucy
       Date: April 1, 2013, 5:58 am
       ---------------------------------------------------------
       Corroded shafts probably. Have you got free wheeling hubs
       fitted?
       Remove the cover off the front of the front output housing and
       there should be three rods, the top left, as you look at it, is
       the high low selector, top right is 4wd and probably seized, the
       bottom is connected to the yellow knob.
       All from memory, look in the tech archive for a bit about
       gearboxes, loads of photos of how it works.
       *****************************************************
       Page 1 of 1