DIR Return Create A Forum - Home
---------------------------------------------------------
Old Leafsprung Land Rovers
HTML https://ollr.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: Technical tips & Questions
*****************************************************
#Post#: 43702--------------------------------------------------
Series 3 gearbox
DIR By: Parn
Date: November 29, 2012, 3:40 am
---------------------------------------------------------
Hi Guys
The gearbox in my 4 cylinder 109 is jumping 1st on over-run.
I have access to a gearbox from a 6 cylinder (by coincidence the
same year of manufacture 1973)
My question is are they interchangable? If not what are the
differences?
Thanks in advance
Cheers
Alan (aka Bruce) :smilewide:
#Post#: 43704--------------------------------------------------
Re: Series 3 gearbox
DIR By: Cornish Cowboy
Date: November 29, 2012, 3:46 am
---------------------------------------------------------
The bell housing is different and if the '6' is a 1ton the
internals are also different and alot slower
#Post#: 43721--------------------------------------------------
Re: Series 3 gearbox
DIR By: AlexB
Date: November 29, 2012, 10:34 am
---------------------------------------------------------
As above, however, if the suffixes are compatible, you can swap
bell housings (and some internals come with it as well)
I did it on a series 2
So it must be easy
#Post#: 43777--------------------------------------------------
Re: Series 3 gearbox
DIR By: Parn
Date: November 30, 2012, 12:55 am
---------------------------------------------------------
Thanks Alex B and Cornish Cowboy.
As far as I can deduce both vehicles would have been CKD and
assembled in Sydney.
I will check the numbers and go from there
Thanks
Alan
*****************************************************
Page 1 of 1