URI:
   DIR Return Create A Forum - Home
       ---------------------------------------------------------
       Old Leafsprung Land Rovers
  HTML https://ollr.createaforum.com
       ---------------------------------------------------------
       *****************************************************
   DIR Return to: Technical tips & Questions
       *****************************************************
       #Post#: 39296--------------------------------------------------
       drum brakes
   DIR By: wrighty
       Date: October 9, 2012, 9:12 pm
       ---------------------------------------------------------
       got a thought exercise for ya last mot the brakes were my
       problem series2a single circuit bought it as a complete strip
       and rebuild replaced every brake cylinders shoes springs and
       drums took her for her mot she failed brakes pulling excessively
       to the left front ns brake was draging no matter how i adjusted
       it no change swapped the new drum for the old one on that corner
       problem solved. But next mot is due 30 dec and on cold mornings
       it still drags for the first minute or so of driving then frees
       up so i'd like to sort it cause i don't want to be struggling to
       get her through her mot at the time of year i need her most .
       #Post#: 39307--------------------------------------------------
       Re: drum brakes
   DIR By: seriesewan
       Date: October 10, 2012, 2:41 am
       ---------------------------------------------------------
       I get a bit of dragging to once side for my first brake of
       nearly every drive  i dont  think its down to setup  I   have
       stripped / checked / rebuilt most of the brake system & its
       always done it.  as long as the problem goes away after a few
       presses of the pedal then just do a few good hard stops before
       you take it for test.
       after much head scratching i am putting it down to crud / rust
       build up in the drums on mine as it allways seems worse after i
       have been in the muck/wet  for some odd reason one drum seems
       more susceptible to rust than the other  ( i have verified this
       by inspecting the drums after  it has stood for a week )
       #Post#: 39321--------------------------------------------------
       Re: drum brakes
   DIR By: rbrtcrowther
       Date: October 10, 2012, 6:55 am
       ---------------------------------------------------------
       I know times are hard guys, But do we have to cut back on
       punctuation quite so much ........
       #Post#: 39340--------------------------------------------------
       Re: drum brakes
   DIR By: seriesewan
       Date: October 10, 2012, 10:25 am
       ---------------------------------------------------------
       Apologies, I sent that update from my telephone.
       #Post#: 39348--------------------------------------------------
       Re: drum brakes
   DIR By: ashcrroft752
       Date: October 10, 2012, 12:26 pm
       ---------------------------------------------------------
       My brakes do this first thing on damp or rainy mornings, no rust
       in the drums no apparent reason for this happening at all. All
       Components are new or less than 1 year old and not from
       Britpart, it's bled properly and adjusted properly.
       I'm putting it down to the shoes on the front axle not being
       from the same batch and having a slightly different friction
       lining, they were bought from one of the suppliers in the
       Shiptonthorpe area and weren't boxed so may not be a pair.
       I've a set of Mintex to fit this weekend so I'm praying to the
       gods of deceleration that this niggle will be cured... But I'm
       not holding my breath.
       #Post#: 39364--------------------------------------------------
       Re: drum brakes
   DIR By: Dave
       Date: October 10, 2012, 1:54 pm
       ---------------------------------------------------------
       --- Quote from: wrighty link ---
       >
       > got a thought exercise for ya last mot the brakes were my
       problem series2a single circuit bought it as a complete strip
       and rebuild replaced every brake cylinders shoes springs and
       drums took her for her mot she failed brakes pulling excessively
       to the left front ns brake was draging no matter how i adjusted
       it no change swapped the new drum for the old one on that corner
       problem solved. But next mot is due 30 dec and on cold mornings
       it still drags for the first minute or so of driving then frees
       up so i'd like to sort it cause i don't want to be struggling to
       get her through her mot at the time of year i need her most .
       >
       --- End Quote ---
       I'm not being funny but have you any idea how difficult that lot
       is to read? If you want help from folks then you'd make our
       lives easier by putting some capital letters and punctuation
       marks in there so that we can read it without having to
       translate it first.
       By the way, you haven't introduced yourself yet.
       #Post#: 39366--------------------------------------------------
       Re: drum brakes
   DIR By: Wooden
       Date: October 10, 2012, 2:10 pm
       ---------------------------------------------------------
       ^^ Don't you know who he is Dave?  - It's 'Wrighty' - former
       English professional footballer turned television "personality".
       #Post#: 39382--------------------------------------------------
       Re: drum brakes
   DIR By: Albert Ross
       Date: October 10, 2012, 3:55 pm
       ---------------------------------------------------------
       Punctuation.... more important than you would believe. I was out
       of breath reading that lot. I sometimes add updates from my
       phone, however I did make certain I knew the keyboard had all
       the right buttons first.
  HTML http://www.youtube.com/watch?v=N7L02tCNi0I
       #Post#: 39401--------------------------------------------------
       Re: drum brakes
   DIR By: Bert the Bodger
       Date: October 11, 2012, 2:29 am
       ---------------------------------------------------------
       If I've translated correctly you've got a post reassembly
       problem with a binding front brake. You have not made it clear
       as to whether you have rebuilt the brakes with decent quality
       new parts, sewage quality new parts, or secondhand parts. This
       information-if offered-would make a tremendous difference to the
       advice you will receive.
       Bert
       *****************************************************
       Page 1 of 1