DIR Return Create A Forum - Home
---------------------------------------------------------
Old Leafsprung Land Rovers
HTML https://ollr.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: Technical tips & Questions
*****************************************************
#Post#: 36979--------------------------------------------------
200Tdi valve clearances
DIR By: Dave
Date: September 13, 2012, 2:49 am
---------------------------------------------------------
I can't find my photocopied workshop manual so could someone
please tell me the required clearance for both inlet and exhaust
valves, please?
Oh, and in metric and imperial cos it depends on which set I
find first.
Ta :)
#Post#: 36981--------------------------------------------------
Re: 200Tdi valve clearances
DIR By: bob86
Date: September 13, 2012, 2:56 am
---------------------------------------------------------
In the autodata book ive got here inlet and exhaust 0.20mm cold.
It does'nt do English measurements.
#Post#: 37058--------------------------------------------------
Re: 200Tdi valve clearances
DIR By: Dave
Date: September 14, 2012, 2:26 am
---------------------------------------------------------
Thanks.
#Post#: 37218--------------------------------------------------
Re: 200Tdi valve clearances
DIR By: Dave
Date: September 15, 2012, 5:24 pm
---------------------------------------------------------
Big thanks to Gadget for helping me do the tappets today. It's
much easier with two people. And Mrs. Gadget for brews n that,
despite having a knackered back.
The engine's a lot quieter now - well, quiet for a Tdi but at
least the sounds coming from it are dieseley sounds and not bag
of spanners sounds. Some of the clearances were so big I could
put the two largest feeler gauges in at the same time with no
resistance. :eek:
I guess you're meant to check and adjust the clearances at
periods somewhat less than every 4 years...
*****************************************************
Page 1 of 1